Filter
Top Products
Owner’s Enjoyment Manual
AudioControl®
14
MODE: Para EQ1 and Para EQ2
Figure 8: Para EQ1 screen
Figure 9: Para EQ2 screen
Besides having a 30-band graphic equalizer, your
DQX also has two fully-programmable parametric
bands. These allow you to select a frequency,
apply boost or cut, and change the bandwidth or
“Q” of the filter.
Para EQ1 mode allows you set the controls for
one of the parametric bands.
Para EQ2 mode lets you change the settings for
the second parametric bands.
Freq(uency): This corner of the screen indicates
which frequency you are boosting or cutting. If
you wish to select another frequency, tap the left
or right arrow buttons until the cursor is flashing
on the number next to “Freq=”. Then use the “+”
and “-” controls to select the frequency to which
you wish to apply boost or cut.
Lvl: When the cursor highlights this part of the
screen, you can now apply boost or cut to both
channels using the “+” and “-” controls. Please
note that you do not have individual channel
control using the parametric equalizers.
Width: This control lets you select how wide of
an area each of the DQX’s parametric bands
affects. You can choose a real narrow bandwidth,
like
1
⁄12
th
of an octave or go as wide as three full
octaves.
Para EQ1Para EQ1
Para EQ1Para EQ1
Para EQ1
Freq=3.15kFreq=3.15k
Freq=3.15kFreq=3.15k
Freq=3.15k
Width=1/6Width=1/6
Width=1/6Width=1/6
Width=1/6
LVL=+12dBLVL=+12dB
LVL=+12dBLVL=+12dB
LVL=+12dB
Para EQ2Para EQ2
Para EQ2Para EQ2
Para EQ2
Freq=3.15kFreq=3.15k
Freq=3.15kFreq=3.15k
Freq=3.15k
Width=4 octWidth=4 oct
Width=4 octWidth=4 oct
Width=4 oct
LVL=0dBLVL=0dB
LVL=0dBLVL=0dB
LVL=0dB