Filter
Top Products
© 2007 • All rights reserved. 11
Storm Series LCR Theater Speakers
Pointing the Mid-Range
Once the audio system is connected and the speakers have been completely installed (with the
grilles off), it is time to point the mid-range driver at the listening area.
1. Ensure that the LOCK screw located on the speaker baffl e is loosened by turning it
counter-clockwise. See Figure 3.12.
LOCK
Screw
Figure 3.12: LOCK Screw
2. Twist the speaker baffl e so that the angled mid-range driver is pointing in the desired
direction. It may be easiest to utilize the bridge on which the mid-range and tweeter are
mounted to physically turn the speaker.
3. Turn the LOCK screw clockwise to tighten the speaker baffl e and lock it in place.