Filter
Top Products
SYS (System Mode)
Press the
SYS key to reach the System mode functions.
System mode is used to make system level
adjustments and modify Nav function displays.
SKIP (Start-Up Option)
Press the
SKIP key during the start-up procedure to
bypass the start-up tests. This is for emergencies as
the IFR tests must be completed to allow IFR flight.
Map
Function
Smart Keys
The Moving Map function uses several “smart” keys
to allow you to declutter the map, find waypoint
information, and setup your map information.
Map Waypoint Keys
APT, VOR, INT, NDB, & USR
The map waypoint “smart” keys are present when the
Moving Map pages are displayed. Press the “smart”
key to control the display of the waypoint type. There
are three selections possible: waypoint identifier and
location symbol, location symbol only, and off.
Pressing the “smart” key subsequent times will
control which selection is made. Map waypoint
choices are: Airport (APT), VOR, NDB, Intersection
(INT), and User (USR).
A solid, reversed waypoint type annunciator above the
“smart” key means the waypoint identifier and
location symbol will both be displayed.
A bold outline of the waypoint type annunciator will
show only a symbol on the waypoint location.
A thin outline around the waypoint type means that it
is turned off and no information for that waypoint
type will be displayed on the map.
Waypoint LIST Key
Each press of this key scrolls through the available
“smart” keys.
1-6
Introduction
APT
APT
NDB
NDB
INT
VOR
APT
USR
2
SKIP
SYS