Filter
Top Products
6
SFP-1 PLACEMENT FOR PROPER VENTILATION
Allow at least 6” (15 cm) of clear space above the SFP-1 chas-
sis for proper ventilation, making sure the air vent slots in the
chassis cover remain unobstructed.
SAFETY INSTRUCTIONS
1. Ventilation - Although your SFP-1 Phono Stage generates only
nominal heat in use, be sure that the ventilation slots in the top
cover have at least 6” of unobstructed air space above them.
2. Water and Moisture - This product should not be used near
water. To prevent fire or shock hazard, do not expose this
product to rain or moisture.
3. Heat - This product should be situated away from heat
sources such as radiators, heat registers, stoves, or other appli-
ances which produce heat.
4. Power Sources - This product should be connected to an AC
power source of the proper rated voltage. The original ship-
ping containers will stipulate the AC voltage this unit can oper-
ate with correctly.
5. Cleaning - A regular dusting with a soft, non-abrasive cloth
will generally keep the finish of the faceplate and chassis look-
ing like new. At no time should you allow any liquid to come in
contact with the SFP-1 Phono Stage; it may run into the elec-
tronic circuitry and cause damage which will not be covered
under your warranty.
6. Servicing - Refer servicing to an authorized service technician.
7. Non-Use Periods - The power cord of this product should be
unplugged from the outlet when left unused for an extended
period of time.
8. Do not remove the SFP-1 chassis cover while the unit is
“on”, or connected to an AC power source. Cover screws
could fall through the ventilation slots and cause electrical
damage to the SFP-1.
PACKING MATERIALS
We recommend that you retain all of the packing material and
shipping boxes for your SFP-1 Phono Stage. They are custom
designed to prevent shipping damage from occurring. Sonic
Frontiers, Inc. will accept no responsibility for any damage
occurring to an SFP-1 Phono Stage that is shipped in packing
material other than the original Sonic Frontiers packing material.
DISCLAIMER OF LIABILITY
Under no circumstances does Sonic Frontiers, Inc. assume lia-
bility or responsibility for injury or damages sustained in the use
or operation of this equipment or for damages to any other
equipment connected to it.
Sonic Frontiers, Inc. reserves the right to make design changes
or improvements without the obligation to revise prior versions.
All specifications are subject to change without notice.
LIMITED FIVE YEAR WARRANTY
Sonic Frontiers, Inc. warrants to the purchaser that each SFP-1
Phono Stage is free of manufacturing defects for a period of
five (5) years from the date of purchase. This five (5) year limit-
ed non-transferable warranty excludes all vacuum tubes, which
we warrant for a period of twelve (12) months. To receive this
warranty, the original purchaser must complete and mail to
Sonic Frontiers, within thirty (30) days from the date of pur-
chase, the enclosed Warranty Registration Card. Sonic
Frontiers, Inc. will then validate the warranty to the original pur-
chaser. This warranty is subject to the following conditions and
l i m i t a t i o n s :
1
. Warranty applies only to the original purchaser from an
authorized Sonic Frontiers reseller.
2. This warranty is void and inapplicable if the product has
been handled other than in accordance with the instructions in
this Owner’s Manual, abused or misused, damaged by acci-
dent or neglect or in being transported, or the defect is due to
the product being tampered with, modified or repaired by any-
one other than Sonic Frontiers, Inc. or an authorized Sonic
Frontiers repair depot.
3. Warranty does not cover normal maintenance.
4. Sonic Frontiers, Inc. shall not be responsible in any way for
consequential or indirect damages or liabilities resulting from
the use and operation of the product covered herein or result-
ing from any breach of this warranty or any implied warranty
relating to said product.
During this period, Sonic Frontiers, Inc. will repair or replace
any defective components free of charge. A Return Authoriza-
tion Number (RA Number) is required before any product is
returned to our factory for any reason. This number must be visi-
ble on the exterior of the shipping container(s) for Sonic
Frontiers to accept the return.
Units shipped to us without a Return Authorization Number or
without a visible RA Number on the exterior of the shipping
container(s) will be returned to the sender, freight collect.
Units to be repaired by Sonic Frontiers, Inc. must be sent ship-
ping and insurance prepaid by the original purchaser in the
original packing material. A returned product should be accom-
panied by a written description of the defect. Repaired units
will be returned by Sonic Frontiers, Inc. shipping and insurance
p r e p a i d .
All other warranties or conditions either written or implied
are void.
Note: In foreign markets (anywhere outside of Canada and the
USA), the warranty is supplied by the authorized International
Distributor. Exact terms and conditions may vary.