Filter
Top Products
TriplePlay Multizone Satellite Audio Receiver 3
© 2003 Antex Electronics, Inc.
Thank You!
Thank you for choosing the world’s first high-fidelity, 3-zone
satellite radio receiver. Only Antex Electronics’ TriplePlay™ uses
the revolutionary SIRIUS
®
Satellite Radio technology.
60 Channels of Music
SRX-3 TriplePlay lets you select from 60 original music channels,
24 hours a day, 7 days a week. Hear today’s hits to R&B oldies
to classical masterpieces, from authentic country and real
bluegrass to cool jazz, hot Latin, reggae, rock, dance, gospel,
new age and even kid’s music.
40 Non-Music Channels
TriplePlay also gives you instant access to 40 plus channels of
world class news, sports and entertainment from CNBC, CNN,
BBC World Service, E! Entertainment Radio, ABC News & Talk,
NPR Now, ESPN, The Speed Channel, and engaging
entertainment from the golden age of radio on Radio Classics
and Radio Disney.
Three Listening Zones
TriplePlay gives you the option to select programming for three
independent listening zones and independently control the
operation of the receiver within each of those zones. With
TriplePlay, you can listen to the latest Top 10 in your living
room, sports in the family room, and the latest breaking news
around the world in your bedroom.
A list of SIRIUS music and entertainment streams is provided for
you in Appendix A. For the most up to date listings, go to
www.sirius.com.
Installing TriplePlay
Antex Electronics strongly recommends that the SRX-3
TriplePlay unit and its antenna be installed by a
professional installer. Brief instructions are presented
here for reference purposes only.
Parts List
Before installing your SRX-3 TriplePlay, make sure you have all
the parts listed below:
? SRX-3 TriplePlay unit
? Antenna
? Remote control
? Power cord
? RCA audio cables (3)
Power Requirements
Power requirements for the TriplePlay are 100-140VAC, 50-
60Hz, 50 Watts.
Positioning the Antenna
Prior to mounting the antenna or finding a permanent home for
your SRX-3 TriplePlay, you first want to validate the position of
the antenna.
1. Power on TriplePlay to make sure the unit has power.
You should see a startup screen with Antex and SIRIUS
logos, followed by the main display (similar to that shown
Figure 4 on page 7).
2. Power off TriplePlay, and then connect the audio cables, IR,
and RS232 control interfaces to the other components in
your audio system.
3. Using RG58U, 50 Ohm coaxial cable, connect the antenna to
TriplePlay.