Filter
Top Products
Installation
To install the Site Master Software Tools program:
Step 1. Insert the Anritsu Site Master Software Tools disk in the CDROM drive.
Step 2. From the Windows Start menu, select
Run .
Step 3. Type:
X:\Setup.exe where X is the drive letter of your CDROM drive.
Step 4. When prompted, press the
Enter key to accept the default directory C:\Program
Files\Site Master Software Tools and the installation will begin.
Step 5. When the installation is complete, press
Enter to restart Windows.
The readme.doc file on the disk provides updated information about the program, and the
Help function provides detailed operating information.
Communication Port Setting
The Site Master Software Tools communicates with the Site Master through a standard se
-
rial COM port on the PC. Set the baud rate of the COM port to 115200.
Step 1. Select
Start, Programs and select Site Master Software Tools.
Step 2. When the program has loaded, select
Settings, Communication.
Step 3. Select the appropriate PC COM port and Transfer Baud Rate for your system,
and click
OK.
7-2
Chapter 7 Software Tools Program
Figure 7-1. Communication Setting Dialog Box