Filter
Top Products
Function Hard Keys
MODE Opens the mode selection box (below). Use the Up/Down arrow key to select a
mode. Press the
ENTER key to implement.
FREQ/DIST Displays the Frequency or Distance to Fault softkey menus depending on the
measurement mode.
AMPLITUDE Displays the amplitude softkey menu for the current operating mode.
SWEEP Displays the Sweep function softkey menu for the current operating mode.
2-3
Chapter 2 Functions and Operations
MEASUREMENT MODE
FREQ - SWR
RETURN LOSS
CABLE LOSS - ONE PORT
DTF - SWR
RETURN LOSS
POWER MONITOR
SPECTRUM ANALYZER
Figure 2-2. Mode Selection Box