Anchor Audio Explorer Dual Basic Pack Stereo System User Manual


 
MADE IN USA
SIX YEAR WARRANTY
Explorer Pro Sound System Owners Manual
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
HAVING TROUBLE WITH YOUR SOUND SYSTEM?
CONDITION POSSIBLE SOLUTION
No Sound
(power LED off)
• turn POWER switch ON
• charge battery or plug in AC cord
Charge Indicator LED off • leave plugged in for 48 hours to repair battery
No Sound
(power LED on)
• check for output from source
• make sure all cables are completely plugged in
• turn up volume control of input used
• remove plug from speaker output if not using external speaker
output
Shortened Battery Life • charge battery fully; if battery life continues to deteriorate,
contact Anchor Audio customer service: 800.262.4671
Distorted Sound • lower system volume control
Excessive Hum or Noise • use shielded cables
• use balanced microphone
HAVING TROUBLE WITH YOUR WIRELESS SYSTEM?
(WIRELESS MODELS ONLY)
CONDITION POSSIBLE SOLUTION
No Sound
(RX Indicator: ON)
• set MUTE switch to on
(handheld mic only)
• turn up WIRELESS volume control
• make sure mic is plugged into body pack transmitter
No Sound
(RX Indicator: OFF)
• push mic power button
• turn Explorer PRO POWER switch on
• make sure transmitter power switch is on
• set receiver and transmitter to same channel
• replace battery in transmitter
NEED MORE HELP? View demonstration videos on proper system setup and
operation at our website - www.anchoraudio.com
EXPLORER PRO TECHNICAL SPECIFICATIONS
Rated Power Output 75 watts AC / DC mode
Max SPL @ Rated Power 109 dB @ 1 meter
Frequency Response 80 Hz – 16 kHz
AC Power Reqs. 90 – 264 VAC, 50/60 Hz
Dimensions
(HWD)
16.5” x 10.5” x 10”
(42 x 27 x 25 cm)
Weight (AC/DC) 23 lbs / 10.4 Kg
Weight (AC only) 16 lbs/ 7.25 Kg
Inputs
Microphone Lo-Z
(1 k Ω)
, balanced, XLR
(2 combo jacks)
12 VDC condenser mic phantom
pwr
Hi-Z
(10 K Ω)
, unbal, 1/4” phone
Auxiliary Hi-Z
(10 k Ω)
, unbal, 1/8” & 1/4”
Sensitivity For Rated Output
Line -8.4 dBV
(380 mVrms)
Mic
(unbal & bal)
-49 dBV
(3.63 mVrms)
Outputs
Line
(post fader)
Lo-Z, buffered, 1/4” balanced
Speaker 4-pole Neutrik Speakon® jack
ANCHOR AUDIO CUSTOMER SERVICE
800.262.4671
FOR ADDITIONAL INFORMATION
visit www.anchoraudio.com
8
(Specifications Subject to Change Without Notice)