Filter
Top Products
User and Installation Guide
Page 1
R
Step 1
Connecting the transmitter
The transmitter connects to a line-out interface via the supplied RCA cable.
Most audio devices provide a line-out interface.
If no line-out interface is available, the transmitter can also be connected to
other audio outputs by using an appropriate adapter. It should be noted that
the audio level of the audio output should conform to the standard line output
level (V ± 2.8 V maximum).
If the audio level is too low, the dynamic range of the transmitter is not fully
used. If the audio level is too high, clipping at high audio levels may occur. If
clipping occurs, either use an adjustable output (such as a headphones
output) or use an Amphony audio level attenuator.
Connect the DC power input with the supplied AC adapter. The use of a surge
protector is recommended to protect the transmitter from power surges.
pp
L
AUDIO
IN
DATA
OUT
R
DC 9V
LR
AUDIO
LINE OUT
Audio Source
Transmitter
DC9V
300 mA
Power outlet
AC adapter
ATTENTION!
Never connect the DATA OUT output to an audio source since this
may damage both the transmitter and the audio equipment !
Unpacking: Check that this package contains:
One set of 2.4 GHz Digital Wireless Headphones, one 2.4 GHz Digital Audio
transmitter, one AC adapter, one dual RCA audio cable.