American Audio XLT2000 Stereo Amplifier User Manual


 
XLT Series SPECS
Power supply: AC 100V, 50/60Hz (Japan)
AC 110V, 60Hz (Colombia)
AC 120V, 60Hz (U.S.A. and Canada)
AC 127V, 60Hz (Mexico)
AC 220V, 50Hz (Chile and Argentina)
AC 220V, 60Hz (Philippines and Korea)
AC 230V, 50Hz (Europe, New Zealand, South Africa, and Singapore)
AC 240V, 50Hz (Australia and U.K.)
MODEL: XLT 2000 (Class H) XLT 2500 (Class H)
Output Power: 450W RMS per Channel @ 8 Ohms, 1kHz, 1% THD 600W RMS per Channel @ 8 Ohms, 1kHz, 1% THD
750W RMS per Channel @ 4 Ohms, 1kHz, 1% THD 1000W RMS per Channel @ 4 Ohms, 1kHz, 1% THD
1000W RMS per Channel @ 2 Ohms, 1kHz, 1% THD 1250W RMS per Channel @ 2 Ohms, 1kHz, 1% THD
(Bridge Mode, Mono) (Bridge Mode, Mono)
1500W RMS @ 8 Ohms, 1kHz, 1% THD 2000W RMS @ 8 Ohms, 1kHz, 1% THD
2000W RMS @ 4 Ohms, 1kHz, 1% THD 2500W RMS @ 4 Ohms, 1kHz, 1% THD
Total Harmonic Less Then 0.1% (20Hz - 20kHZ @ 8 Ohms Less Then 0.1% (20Hz - 20kHZ @ 8 Ohms
Distortion (THD):
Frequency (+/-01db, @rated output power, 8 Ohms): 20Hz - 20KHz (+/-01db, @rated output power, 8 Ohms): 20H - 20KHz
Response:
Slew Rate: 20V Per µsec 20V Per µsec
Damping Factor @ 200 200
8 Ohm:
Dynamic Range: More Then or Equal to 80dB More Then or Equal to 80dB
S/N Ratio: More Then or Equal to 90dB More Then or Equal to 90dB
Impedance: 20K Ohms Balanced 20K Ohms Balanced
10K Ohms Unbalanced 10K Ohms Unbalanced
Dimensions 19” x 15.5” x 3.5” 19” x 15.5” x 3.5”
(LxWxH): 482.6 x 394 x 89mm (4 Rack Mount Spaces) 482.6 x 394 x 89mm (4 Rack Mount Spaces)
Weight: 20lbs. / 9Kgs 20lbs / 9Kgs
American Audio® - www.americanaudio.us - XLT Series Power Amplifier User Manual Page 18