Filter
Top Products
XLT Series SPECS
Power supply: AC 100V, 50/60Hz (Japan)
AC 110V, 60Hz (Colombia)
AC 120V, 60Hz (U.S.A. and Canada)
AC 127V, 60Hz (Mexico)
AC 220V, 50Hz (Chile and Argentina)
AC 220V, 60Hz (Philippines and Korea)
AC 230V, 50Hz (Europe, New Zealand, South Africa, and Singapore)
AC 240V, 50Hz (Australia and U.K.)
MODEL: XLT 900 (Class AB) XLT 1200 (Class AB)
Output Power: 200W RMS per Channel @ 8 Ohms, 1kHz, 1% THD 310W RMS per Channel @ 8 Ohms, 1kHz, 1% THD
300W RMS per Channel @ 4 Ohms, 1kHz, 1% THD 500W RMS per Channel @ 4 Ohms, 1kHz, 1% THD
450W RMS per Channel @ 2 Ohms, 1kHz, 1% THD 600W RMS per Channel @ 2 Ohms, 1kHz, 1% THD
(Bridge Mode, Mono) (Bridge Mode, Mono)
600W RMS @ 8 Ohms, 1kHz, 1% THD 1000W RMS @ 8 Ohms, 1kHz, 1% THD
900W RMS @ 4 Ohms, 1kHz, 1% THD 1200W RMS @ 4 Ohms, 1kHz, 1% THD
Total Harmonic Less Then 0.1% (20Hz - 20kHZ @ 8 Ohms Less Then 0.1% (20Hz - 20kHZ @ 8 Ohms
Distortion (THD):
Frequency (+/-01db, @rated output power, 8 Ohms): 20Hz - 20KHz (+/-01db, @rated output power, 8 Ohms): 20H - 20KHz
Response:
Slew Rate: 20V Per µsec 20V Per µsec
Damping Factor @ 100 200
8 Ohm:
Dynamic Range: More Then or Equal to 80dB More Then or Equal to 80dB
S/N Ratio: More Then or Equal to 85dB More Then or Equal to 90dB
Impedance: 20K Ohms Balanced 20K Ohms Balanced
10K Ohms Unbalanced 10K Ohms Unbalanced
Dimensions 19” x 13.3” x 3.5” 19” x 15.5” x 3.5”
(LxWxH): 482.6 x 338 x 89mm (4 Rack Mount Spaces) 482.6 x 394 x 89mm (4 Rack Mount Spaces)
Weight: 13lbs. / 6Kgs 15lbs / 7Kgs
American Audio® - www.americanaudio.us - XLT Series Power Amplifier User Manual Page 17