Filter
Top Products
13
GENERAL FUNCTIONS AND CONTROLS - REMOTE UNIT
©American Audio® - www.americandj.com - DIGI-PRO™ Instruction Manual Page 8
A. TOP UNIT CONTROLS (FIGURE 3)
1. FILTER/COAST/ADJUST - This button allow
you to change the FILTER and Coast values.
With the FILTER/COAST/ADJUST button select-
ed (on) the FILTER value is one second and the
COAST value is five seconds. With the FILTER/
COAST/ADJUST deselected (off) the FILTER
value is a 1/2 second and the COAST value is
three seconds. A yellow LED will indicated on
and off functions.
2. CUE MEMORY - This button allows you to
program up to 4 cue points on the CD. For more
information on setting a cue point see page 20.
3. FILTER - This button activates the FILTER
effect. This effect simulates the sudden platter
stop of a turntable. Almost like pressing the stop
button on a turntable. When the FILTER effect
is selected a number 1 will appear in the LCD
(14), this indicates the FILTER effect is active.
See "FILTER" effect on page 26.
4. REV/PLAY - This button activates reverse
play mode. When this effect is selected the disc
will begin to play in reverse mode, and continue
to play in reverse until reverse play function is
turned off. If reverse play is not turned off the disc
10
1
17
7 8
1918 20
21 22 24 25
26
28
27
29 30
14
6 12115
4 16
23
15
3
92
31 32 33 34