Filter
Top Products
5
Woofer replacement continued:
6
6
The picture on the right shows what
the SA1530z looks like with the grill and
woofer removed . Place the new woofer
(part #0011777) where the old one was.
Follow the same steps as above, but
backwards 5 to 1, making sure to keep
the led PCB assembly cable in front of
the woofer. Power up the SA1530z and
the new woofer should now be pumping
out glorious lows. Awesome, you just
replaced a 15” woofer!
5
5
The positive (solid yellow) and negative
(yellow and black) cables are still
attached to the woofer terminals.
Remove the cables from their terminals
simply by pushing down on the terminal
and pulling out the cable.
-
-
+
+
Push down
Push down