Filter
Top Products
7
To save a preset it is necessary to select the Preset item; using the dial it is possible to choose the desired
preset number, to be confirmed pressing the Enter key.
After data saving, a character string (preset name) will be shown to the user for editing (max 8 chars).
Using Left and Right keys the user can move into the string, with the dial the blinking character can be edited,
Enter confirms the choice and Esc cancels operation allowing to maintain the old preset name. Upon confirmation
the new preset name will be shown in the lower left corner of the window and in the Name field.
To get back to the main menu, select 1/1 and press the Esc key.
This function allows a simple MIDI configuration:
with the Up/Down key it's possible to select the MIDI channel and/or the output enable; selection is
high lighted printing the item in reverse color.
With the dial it is possible to change the value of the parameter, which will be operating immediately
(no confirmation needed). To get back to the main menu, select 1/1 and press the Esc key. These two
parameters are system settings, ie. They don't belong to a particular preset.
STORE
EMPTY
02
Name:
Num:
PRESET 01
1/1
PRESET 01
OUT EN. OFF
01
MIDI
CHANNEL
1/1
PRESET 01
1/1
MIDI
CHANNEL
OUT EN. OFF
01
PRESET 01
1/1
OUT EN. OFF
01
MIDI
CHANNEL
c. MIDI Setup
This sub-menu has 2 pages: the first (1/2) shows the 6 output volumes, the second (2/2)the activity of
the 6 limiters.
d. VU-Meter
Enter accesses the next page, Esc gets back to the precedent.
CLIP
-30
OUT VOL
123456
PRESET 01
1/2