Filter
Top Products
ALPINE TDM-9501RM 68P01434K82-O
13-EN
Controlling CD Changer (Optional)
If an optional Alpine 6-disc CD Changer (M-Bus)
is connected to the 8-pin DIN connector of the
TDM-9505RB/TDM-9503R/TDM-9501RM/TDM-
9501R you can control the CD Changer using the
TDM-9505RB/TDM-9503R/TDM-9501RM/TDM-
9501R.
NOTE
The CD controls on the TDM-9505RB/TDM-9503R/TDM-
9501RM/TDM-9501R for the CD operation are functional
only when the CD Changer is interconnected with the
TDM-9505RB/TDM-9503R/TDM-9501RM/TDM-9501R.
1 Press the SOURCE button to activate the CD
Changer.
The display shows the disc number and track
number.
2 Make sure that the Function indicator illuminates,
then press the Preset buttons to select the
desired disc loaded in the CD Changer.
3 To pause playback, press the -/J button.
Pressing the -/J button again will resume
playback.
NOTES
• If the "F" indicator is illuminated the Disc Select
buttons become nonfunctional.
• Press the SOURCE button to activate the CHANGER
mode.
CD Changer Operation
g
f
SOURCE
-/J
Preset buttons
Music Sensor (M.S.) Skip
1 Press the g button once to return to the
beginning of the current track.
If you wish to return to the beginning of a track
further back, repeatedly press until you reach the
desired track.
Press the f button once to advance to the
beginning of the next track.
If you wish to advance to a track further ahead,
press repeatedly until the desired track is
reached.
NOTE
The music sensor feature is functional in the play or
pause mode.
Fast Forward and Backward
1 Press and hold the g or f button to quickly
move backward or forward respectively until you
reach the desired portion.
NOTE
This feature works only in the CD playback mode.
5/13-17 (EN) TDM-9505RB 02.7.15, 10:14 AM13