Filter
Top Products
ALPINE TDM-9501RM 68P01434K82-O
7-EN
3 Repeat the procedure to store up to 5 other
stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
A total of 24 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
MW and LW).
NOTE
If a preset memory has already been set in the same
preset location, it will be cleared and the new station will
be memorized.
Automatic Memory of Station
Presets
1 Press the SOURCE button until the frequency
appears in the display.
2 Press the BAND button until the desired radio
band appears in the display.
Each press changes the radio bands as follows:
→ F1 → F2 → MW → LW
3 Press and hold the A. ME. button for at least 2
seconds.
The frequency on the display continues to
change while the automatic memory is in
process.
The tuner will automatically seek and store 6
strong stations in the selected band in order of
signal strength.
When the automatic memory has been
completed, the tuner goes to the station stored in
the preset location No. 1.
NOTE
If no stations are stored, the tuner will return to the
original station you were listening to before the auto
memory procedure began.
Tuning to Preset Stations
1 Press the SOURCE button until the frequency
appears in the display.
2 Press the BAND button repeatedly until the
desired band is displayed.
Each press changes the radio bands as follows:
→ F1 → F2 → MW → LW
3 Make sure that the function indicator at the top
side of the "F" button illuminates, then press the
station preset button that has your desired radio
station in memory.
The display shows the band, preset number with
a triangle and frequency of the station selected.
4/06-12 (EN) TDM-9505RB 02.7.15, 10:17 AM7