Filter
Top Products
ALPINE TDM-9501RM 68P01434K82-O
6-EN
3 Press the TUNE button to illuminate the "DX"
and "SEEK" indicators in the display.
With the DX mode activated, both strong and
weak stations will be tuned in the Auto-Seek
operation.
Press again to return to the local mode. The "DX"
indicator will turn off and the "SEEK" indicator
will remain illuminated. Now, only strong stations
will be tuned.
4 Press the g or f button to automatically
seek a station downward or upward respectively.
When the unit finds a station, the unit stops at
that station.
Press the same button again to seek the next
station.
Manual Storing of Station Presets
1 Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2 Make sure that the function indicator at the top
side of the "F" button illuminates, then press and
hold the preset buttons (1 through 6) that you
want to store the station on for at least 2
seconds. The selected station is stored.
The display shows the band, preset No. with a
triangle (
) and station frequency memorized.
Radio Operation
TUNE / A.ME
SOURCE
g
f
BAND
Manual Tuning
1 Press the SOURCE button until radio frequency
appears in the display.
2 Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the radio bands as follows:
→ F1 → F2 → MW → LW
3 Press the TUNE button repeatedly until "DX
SEEK" and "SEEK" disappears from the display.
NOTE
The initial mode is DX-SEEK.
4 Press the g or f button to move downward
or upward one step respectively until the desired
station frequency is displayed.
NOTE
The ST indicator appears on the display when a Stereo
FM station is tuned in. If the stereo FM signal becomes
weak, the ST indicator disappears from the display and
the unit automatically switches the mode from stereo to
monaural to reduce the noise. When the signal becomes
strong enough, the unit automatically switches back to
the stereo mode.
Automatic Seek Tuning
1 Press the SOURCE button until radio frequency
appears in the display.
2 Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the radio bands as follows:
→ F1 → F2 → MW → LW
Preset buttons (1 through 6)
4/06-12 (EN) TDM-9505RB 02.7.15, 10:17 AM6