Filter
Top Products
7-EN
01GB04CDE9874E.fm
ALPINE CDE-9874E 68-09359Z38-A (EN)
Lowering Volume Quickly
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
Press /MUTE (CDE-9874E only) or MUTE/SETUP
(CDE-9872E only) to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing /MUTE (CDE-9874E only) or MUTE/SETUP
(CDE-9872E only) again will bring the audio back to its
previous level.
Setting Time
1
Press and hold SOUND/SETUP (CDE-9874E only)
or MUTE/SETUP (CDE-9872E only) for at least
2 seconds to activate the SETUP mode.
2
Turn the Rotary encoder (CDE-9874E only) or
press and (CDE-9872E only) to select the
CLOCK ADJ mode, and then press / /ENT.
The time indication will blink.
3
Turn the Rotary encoder (CDE-9874E only) or
press and (CDE-9872E only) to adjust the
hours while the time indication is blinking.
4
When the hour has been adjusted, press / /ENT.
5
Turn the Rotary encoder (CDE-9874E only) or
press and (CDE-9872E only) to adjust the
minutes while the time indication is blinking.
6
Press and hold SOUND/SETUP (CDE-9874E only)
or MUTE/SETUP (CDE-9872E only) for at least 2
seconds to return to normal mode.
•
To synchronize the clock to another clock/watch or radio time
announcement, press and hold
//ENT
for at least 2 seconds after
setting the “hour.” Minutes will reset to “00”. If the display shows
over “30” minutes when you do this, the time will advance one hour.
• Pressing /MUTE (CDE-9874E only) or /AUDIO
(CDE-9872E only) will return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
CDE-9874E
CDE-9872E
Listening to Radio
1
Press SOURCE/ to select TUNER mode.
2
Press BAND repeatedly until the desired radio band
is displayed.
F1 (FM1) F2 (FM2) AM F1 (FM1)
3
Press TUNE/A.ME to select the tuning mode.
DX SEEK (Distance mode) SEEK (Local mode)
OFF (Manual mode) DX SEEK
• The initial mode is Distance mode.
Distance mode:
Both strong and weak stations will be automatically tuned in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned in (Automatic
Seek Tuning).
Manual mode:
The frequency is manually tuned in steps (Manual tuning).
4
Press or to tune in the desired station.
Holding down or will change the frequency
continuously.
Radio
BAND
Preset buttons
(1 through 6)
TUNE/A.ME
SOURCE/
BAND
Preset buttons
(1 through 6)
TUNE/A.ME
SOURCE/
Remote control sensor
Remote control sensor
Controllable with Remote Control
This unit can be controlled with an optional Alpine
remote control. For details, consult your Alpine dealer.
Point the optional remote control transmitter at the re-
mote-control sensor.
Controllable with Remote Control
This unit can be controlled with an optional Alpine
remote control. For details, consult your Alpine dealer.
Point the optional remote control transmitter at the re-
mote-control sensor.
CDE-9872E
CDE-9874E
68-09359Z38-A_F.book Page 7 Tuesday, September 4, 2007 4:15 PM