Alpine CDE-9874E CD Player User Manual


 
9-EN
01GB04CDE9874E.fm
ALPINE CDE-9874E 68-09359Z38-A (EN)
*
3
Displayed only when the AUX+ SETUP is set to ON, refer to “Setting
the AUX+ SETUP Mode” (page 17).
*
4
Displayed only when BT IN is set to BT ADAPTER. Refer to
“Bluetooth Setting” (page16).
2
While playing back MP3/WMA/AAC, press 1 or
2 to select the desired folder.
Pressing and holding 1 or 2 will change folders
continuously.
3
Press or to select the desired track (file).
Returning to the beginning of the current track (file):
Press .
Fast backward:
Press and hold .
Advancing to the beginning of the next track (file):
Press .
Fast forward:
Press and hold .
4
To pause playback, press //ENT.
Pressing //ENT again will resume playback.
5
To eject the disc, press .
Do not remove a CD during its eject cycle. Do not load more than
one disc at a time. A malfunction may result from doing either.
If the CD does not eject, press and hold for at least 2 seconds.
The “DISC IN” indicator lights up when a disc is inserted.
CDE-9874E (compatible with MP3/WMA/AAC)/
CDE-9872E (compatible with MP3):
The CD-player can play discs containing audio data, MP3 data,
WMA data and AAC data.
WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from
iTunes Music Store and files that are copy-protected (copyright
protection) cannot be played back on this unit.
The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
MP3/WMA/AAC Play Display
The folder number and file number will be displayed as
described below.
Press VIEW to switch the display. See “Displaying the Text”
(page 14) for information about display switching.
Repeat Play
Press 4 to play back repeatedly the track being
played.
The track (file) will be played repeatedly.
Press 4 again and select off to deactivate repeat play.
CD mode :
MP3/WMA/AAC mode :
M.I.X. (Random Play)
Press 5 in the play or pause mode.
The tracks (files) on the disc will be played back in random
sequence.
To cancel M.I.X. play, press 5 again.
CD mode :
MP3/WMA/AAC mode :
Searching for CD Text
On discs utilizing CD Text, songs can be searched and played by using
their recorded titles. For discs without CD Text, searches are made
using the track numbers associated with each song.
1
Press /ESC during play.
This will set the search mode.
2
Turn the Rotary encoder (CDE-9874E only) or
press and (CDE-9872E only) to select the
desired track, and then press / /ENT.
This will play the selected track.
Press and hold /ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode is canceled if no operation is performed
for 10 seconds.
CD text search cannot be made during M.I.X. play.
F101 T103
Folder number
display
File number
display
: Only a track is repeatedly played back.
: Only a file is repeatedly played back.
: Only files in a folder are repeatedly played back.
: The tracks are played back in random sequence.
: Only files in a folder are played back in
random sequence.
: The files are played back in random sequence.
68-09359Z38-A_F.book Page 9 Tuesday, September 4, 2007 4:15 PM