Filter
Top Products
4-EN
Getting Started
Receiving XM data broadcasts
If this receiver is connected to an XM compatible Alpine
navigation system, Traffic & Weather information can be
received and displayed on the navigation screen. The
operation is controled from the navigation system. For
operating details, refer to the Owner’s Manual of the NVD-
A801 map disc. This unit is compatible with NVE-N872A
DVD-ROM navigation system.
For details about how to view this manual, refer to “Manual
Overview” in the NVD-A801 Owner's Manual.
How to Subscribe
Make sure that the optional XM antenna has been installed
before beginning the subscription process. Users can
subscribe by visiting XM’s Website at
www.xmradio.com
or by calling 1-800-XM-RADIO (1-800-967-2346).
Customers should have their Receiver ID ready; see
“Checking the XM Receiver ID Number” on this page.
•© 2005 XM Satellite Radio Inc. All rights reserved.
•NAVTEQ Traffic- is a trademark of NAVTEQ North
America, LLC.-2005. NAVTEQ North America, LLC.
• XM and its corresponding logos are trademarks of XM
Satellite Radio Inc.
• NavTraffic is the nation's first satellite traffic information
service to display current traffic information for a driver's
chosen route on the vehicle's on-board navigation system.
XM NavTraffic is powered by NAVTEQ Traffic.
Initial System Start-Up
Be sure to press the RESET switch when using the unit for
the first time, after changing the car battery, etc.
11
Press RESET with a ball-point pen or similar
pointed object.
Checking the XM Receiver ID Number
You need to provide XM with the unique XM Receiver ID
number for your HCE-100XM in order to subscribe to XM's
programming.
This number is an 8 character alphanumeric number
that is printed on a label directly on the bottom of the
unit.
This number is also displayed in the Navigation System
and can be found in the following way.
RESET switch
(Side of the unit)
1
Touch [ ].
Press MENU.
The Nav Menu screen is displayed.
2
Touch [Setup].
Select (highlight) “Setup” by tilting the joystick and
press ENTER.
The Setup menu is displayed.
3
Touch [Traffic Information].
Select (highlight) “Traffic Information” by tilting the
joystick and press ENTER.
The Traffic Information screen is displayed.
The XM Receiver ID number is displayed.
•You can check your ID number printed on the label on the
bottom of the HCE-100XM, or on the label on the packing
box.
XM Receiver ID number
RESET