Filter
Top Products
16-EN
SETUP
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, choose from Sound Customizing,
Visual Customizing, etc., to make your desired settings.
CDE-9845
CDE-9843
CDE-9841
A typical SETUP procedure is shown in steps 1 to 4
as follows. See below for further information about
each SETUP menu.
1
Press and hold MUTE/SETUP for at least 2
seconds.
SETUP mode is activated.
2
Press g or f to select the desired SETUP
menu.
(e.g. Select SUBW)
CDE-9845
ILLUMI → DIMMER → SUBW → CDDA / MP3/CDDA →
SCROLL TYPE → SCROLL → AUX IN →
*
1
(AUXILIARY/TV/VCR/GAME) → POWER IC → AREA*
2
→
DEMO → ILLUMI
*
1
Displayed only when AUX IN is ON.
*
2
Refer to “Listening to Radio” (page 6).
CDE-9843
DIM → SUBW → CD-DA / CDDA/MP3 → SCR TYPE → SCR →
PWR → AREA
*
2
→ DIM
*
2
Refer to “Listening to Radio” (page 6).
CDE-9841
SUBW → PWR → SUBW
3
Press BAND to change the setting.
(e.g. Select SUBW ON or SUBW OFF.)
4
Press MUTE/SETUP for at least 2 seconds again.
The display returns to normal mode.
Sound Customizing
Subwoofer On and Off
SUBW ON (Initial setting) / SUBW OFF
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
1Press the Rotary encoder (CDE-9845/CDE-9843 only) or
press MODE (CDE-9841 only) repeatedly to select the
SUBW mode.
BASS → TREBLE → SUBWOOFER → BALANCE → FADER →
DEFEAT → VOLUME → BASS
2To adjust the level, turn the Rotary encoder (CDE-9845/
CDE-9843 only) or press 4 and 3 (CDE-9841 only).
g f
BAND
MUTE/SETUP
g f
BAND
g f
BAND
MUTE/SETUP
MUTE/SETUP
Rotary encoder
Rotary encoder
4/3
MODE