Filter
Top Products
15-EN
Erasing Disc Title/Radio Station Title
1
Press TITLE to select the Title Display. Then,
press again and hold for at least 2 seconds.
2
Press and hold -/J for at least 2 seconds.
The title in the display will blink.
3
Press g or f repeatedly until the title you
want to erase is displayed.
4
Press and hold -/J for at least 2 seconds to erase
the title displayed.
5
Press TITLE to cancel the title erasing mode.
•You cannot erase CD-TEXT.
• “NO DATA” is displayed for 2 seconds if the title is not input in
step 2, or if the title is erased in step 4.
Displaying Time
Press TITLE repeatedly until the time is displayed.
Each press changes the display.
For details, see “Displaying the Title/Text” (page 14).
• Selecting any tuner or CD function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
• When the power is off but the ignition key is on, press TITLE to
display the time.
Setting Time
1
In the Clock priority mode, press and hold
TITLE for at least 2 seconds while the time is
displayed.
The time indication will blink.
2
Turn the Rotary encoder (CDE-9845/CDE-9843
only) or press
44
44
4 and
33
33
3 (CDE-9841 only) to adjust
the hours while the time indication is blinking.
3
When the hour has been adjusted, press the
Rotary encoder (CDE-9845/CDE-9843 only) or
press MODE (CDE-9841 only).
4
Turn the Rotary encoder (CDE-9845/CDE-9843
only) or press
44
44
4 and
33
33
3 (CDE-9841 only) to adjust
the minutes while the time indication is blinking.
The time is automatically set 5 seconds after the minute
adjustment. The time can also be manually set by
pressing the Rotary encoder (CDE-9845/CDE-9843 only)
or press MODE (CDE-9841 only).
•
To synchronize the clock to another clock/watch or radio time
announcement, press and hold the Rotary encoder (CDE-9845/
CDE-9843 only) or press and hold MODE (CDE-9841 only) for at
least 2 seconds after setting the “hour.” Minutes will reset to 00. If
the display shows over “30” minutes when you do this, the time
will advance one hour.
About “Title” and “Text”
Title:
With this device, it is possible to input the CD and radio
station name (page 15). This inputted name is referred to as a
“title.”
You cannot input or display titles on MP3/WMA discs.
Text:
Text compatible CDs contain text information such as the disc
name and track name. Such text information is referred to as
“text.”
• Some characters may not be displayed correctly with this device,
depending on the character type.
• When the Scroll Setting (page 17) is set to “SCROLL MANU” for
CDE-9845 and “SCR MANU” for CDE-9843, press and hold
TITLE for at least 2 seconds to scroll the Text information only
once (TEXT DISPLAY, FOLDER NAME DISPLAY, FILE NAME
DISPLAY or TAG DISPLAY mode).
• “NO SUPPORT” (CDE-9845 only) or “NO SUPRT” (CDE-9843/
CDE-9841 only) is displayed when the desired text information
cannot be displayed on this unit.
• If the title was not previously input, “NO TITLE” is displayed.
• The text or tag information may not be correctly displayed,
depending on the contents.
Titling Discs/Radio Stations
It is possible to title your favourite CD's or radio stations.
You cannot input titles for MP3/WMA discs.
1
Press TITLE and select the Title Display.
For details, see “Displaying the Title/Text” (page 14).
2
Press and hold TITLE for at least 2 seconds.
The first character will blink.
3
Turn the Rotary encoder (CDE-9845/CDE-9843
only) or press
44
44
4 and
33
33
3 (CDE-9841 only) to select
the desired letter/numeral/symbol available for
naming.
4
Press the Rotary encoder (CDE-9845/CDE-9843
only) or press MODE (CDE-9841 only) to store the
first character.
The first character will stop blinking and the display will
automatically advance to the next character. When that
character begins to blink, you may choose the next letter
or symbol of your title.
5
Repeat steps 3 and 4 above to complete the titling.
Pressing the Rotary encoder (CDE-9845/CDE-9843 only)
or press MODE (CDE-9841 only) after entering the 8th
character automatically stores the title into memory.
When entering a title of less than 8 characters (for
example, 3 character title):
After entering 3 characters, the 4th character space will
be blinking. Go to step 6 to complete the title.
6
Press TITLE to record the title.
• If you cancel while entering a title, selected characters are not
written.
•You can enter 18 CD titles and 24 radio station titles on this unit. If
you try to store beyond the limit, the display will show “FULL
DATA.” At this point, no more titles can be stored. To input a new
title, one of the previously inputted titles must first be deleted.
• When you want to erase a title, enter the “ ” symbol into all
spaces.
• The operations described in steps 3 to 5 must be made within 10
seconds. The input mode will be cancelled if no action is taken for
over 10 seconds.