Filter
Top Products
27-EN
5
Press SOURCE/POWER to select the AUX
(external input) mode.
• When using the Versatile Link Terminal (KCA-410C), you can
connect two external inputs. To select the mode, press BAND on the
unit.
Setting Tone Defeat for External Devices
When inputting external devices to this unit, turning tone defeat on
will bypass EQ and MX, i.e., sound for external devices is output at
the default setting.
1
Press FUNCTION/SETUP to select the SETUP
mode*.
* See “About SETUP” on Page 6.
2
Press / or - to select the INT AUDIO mode.
3
Press -/J / ENT. to set INT AUDIO ON.
4
When the setting is completed, press FUNCTION/
SETUP to return to the normal mode.
Turning Mute Mode On/Off
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from
the device. This function can be turned ON or OFF from the head unit
by following procedure below.
1
Press FUNCTION/SETUP to select the SETUP
mode*.
* See “About SETUP” on Page 6.
2
Press / or - to select the INT MUTE mode.
3
Press -/J / ENT. to set INT MUTE OFF.
4
When the setting is completed, press FUNCTION/
SETUP to return to the normal mode.
External Device
Subwoofer On and Off
1
Press FUNCTION/SETUP to select the SETUP
mode*.
* See “About SETUP” on Page 6.
2
Press / or - to select the SUBW. ON or OFF
mode.
3
Press -/J / ENT. to set SUBW. ON.
4
After completing the setting, press FUNCTION/
SETUP to return to the normal mode.
5
Press Rotary encoder to select the SUBW. mode.
Press g or f after selecting the Subwoofer mode,
and the subwoofer output phase is toggled “NORMAL
(PHASE 0°)” or “REVERSE (PHASE 180°).”
6
Turn the Rotary encoder within 5 seconds and
adjust the level (0 to +15) of the subwoofer.
• Once the mode is selected, failure to perform an operation within 5
seconds will result in cancellation of the adjustment mode.
• The subwoofer output is a monaural output.
Setting the AUX Mode (V-Link)
You can input TV/video sound by connecting an optional Ai-NET/
RCA Interface cable (KCA-121B) or Versatile Link Terminal (KCA-
410C) to this component.
1
Press FUNCTION/SETUP to select the SETUP
mode*.
* See “About SETUP” on Page 6.
2
Press / or - to select the AUX IN mode.
3
Press -/J / ENT. to set to ON.
•After setting AUX IN to ON, use / or - to select the AUX display
selection, then press -/J / ENT. which will allow setting of the
AUX mode “display.”
4
When the setting is completed, press FUNCTION/
SETUP to return to the normal mode.
(Initial setting)
(Initial setting)
(Initial setting)
(Initial setting)
SUBW. ON SUBW. OFF
SUBW. BALANCE FADER
DEFEAT
VOLUME
AUX IN OFF AUX IN ON
INT AUDIO OFF INT AUDIO ON
INT MUTE ON INT MUTE OFF
TUNER AUXCDTAPE CHANGER
*1
(*1: Only when the changer is connected)