Filter
Top Products
24-EN
Titling Discs/Stations
It is possible to title your favorite CD's or radio stations.
You cannot input titles on MP3/WMA discs.
1
Press TITLE and select the Title Display.
For details, see asterisk 1 of “Displaying the Title/Text”
(page 22).
2
Press and hold TITLE for at least 2 seconds. The
first character will blink.
3
Press BAND to select the characters/symbols.
Upper case → Lower case → Numeral/Symbol* → Upper
case
* Press g or f to change pages. (CDA-9855 only.)
4
Turn the Rotary encoder to select the desired
letter/numeral/symbol available for naming.
5
Press Rotary encoder to store the first character.
The first character will stop blinking and the display will
automatically advance to the next character. When that
character begins to blink, you may choose the next letter
or symbol of your title.
Correcting the title (CDA-9855 only)
In the title input mode, press SOURCE/POWER to move
the cursor to the input title line. Turn the Rotary encoder to
move the cursor to the portion to be corrected. Press
SOURCE/POWER again to return to the title input mode,
and perform the correction.
6
Repeat steps 3 and 5 above to complete the titling.
Pressing the Rotary encoder after entering the 8th
character (for CDA-9855 16th character) automatically
stores the title into memory.
When entering a title of less than 8 or 16 characters (for
example, 3 character title):
After entering 3 characters, the 4th character space will
be blinking. Go to step 7 to complete the title.
7
Press TITLE to record the title.
• If you cancel while entering a title, selected characters are not
written.
•You can enter 18 radio station titles (24 for the CDA-9853 model)
and 18 CD titles on this unit. If you try to store beyond the limit,
the display will show “FULL DATA.” At this point, no more titles
can be stored. To input a new title, one of the previously inputted
titles must first be deleted.
• The CD Changer title length or memory capacity varies depending
upon the model being used.
• When you want to erase a title, enter a space (and symbol “ ” for
the CDA-9853 model).
• The operations described in steps 3 to 6 must be made within 10
seconds. The input mode will be canceled if no action is taken for
over 10 seconds.
Erasing Disc Title/Station Title
1
Press TITLE to select the Title Display. Then, press
again and hold for at least 2 seconds.
•For details, see asterisk 1 of “Displaying the Title/Text” (page 22).
2
Within 10 seconds, press and hold -/J for at least
2 seconds.
The title in the display will blink.
3
Within 10 seconds, press g or f repeatedly
until the title you want to erase is displayed.
4
Within 10 seconds, press and hold -/J for at least
2 seconds to erase the title displayed.
5
Press TITLE to cancel the title erasing mode.
•You cannot erase CD-TEXT.
• "TITLE NO DATA" ("NO DATA") is displayed for 2 seconds if the
title is not input in step 2, or if all titles are erased in step 4.
Displaying Time
Press TITLE repeatedly until the time is displayed.
Each press changes the display.
For details, see “Displaying the Title/Text” (page 22).
• Selecting any tuner or CD function while in the clock priority mode
will interrupt the time display momentarily. The function selected
will be displayed for about 5 seconds before the time returns to the
display.
• When the power is off but the ignition key is on, press TITLE to
display the time (CDA-9853 only).
Blackout Mode On and Off (CDA-9855 only)
When Blackout mode is turned on, the display will turn off to reduce
power consumption. This additional power enhances the sound quality.
Press and hold FUNC. for at least 2 seconds to
activate the blackout mode.
The display will turn off.
• If any button on the unit is pressed during the blackout mode, the
function will be displayed for 5 seconds to show the operation
before returning to Blackout mode.
To cancel Blackout mode, press and hold FUNC. for at least 2
seconds.