Filter
Top Products
28-EN
XM Radio Operation
SOURCE Preset buttons (1 through 6)BANDCAT
f UP g DN SETUP
3 Press the g DN or f UP button to select the
desired channel. Holding the g DN or f UP
buttons will change channels continuously.
Checking the XM Radio ID Number
You need to provide XM with the unique XM Radio ID
number for your XM Radio Receiver in order to
subscribe to XM's programming.
This number is an 8 character alphanumeric number
that is printed on a label directly on the XM Receiver.
It can also be displayed on the screen of the CDA-7995/
CDA-7894/CDA-7893/CDA-7892 in the following way.
1 While receiving XM1/XM2, press the g DN or f
UP button to select channel “0.”
2 The unit alternately displays “RADIO ID” for 2 seconds,
then the ID number for 10 seconds.
3 To cancel the ID number display, set the channel to
other than “0.”
Tips
There is another way to display your ID number.
1. Press and hold the SETUP button for at least 3 seconds.
2. Press the f UP or g DN button repeatedly to select
“ID.”
3. Press the BAND button to display your ID number.
4. After checking your ID number, press the SETUP button to
return to the normal display.
NOTES
• You cannot use “O,” ”S,”” I,” or ”F” for the ID Number.
• You can check your ID number printed on the label on the
package of your XM Satellite Radio Receiver (TUA-T020XM).
TITLE
Receiving XM Channels with the XM
Receiver (Optional)
XM Satellite Radio
∗
is the next generation of audio
entertainment, with up to 100 brand-new digital
channels. For a small monthly fee, subscribers can hear
crystal-clear music, sports, news and talk, coast-to-
coast via satellite. For more information, visit XM’s
website at www.xmradio.com or call 1-877-XMRADIO.
An optional XM Satellite Radio Receiver (TUA-T020XM)
may be connected to the CDA-7995/CDA-7894/CDA-
7893/CDA-7892 if it is Ai-NET compatible. With an XM
Receiver connected to the Ai-NET input of the CDA-
7995/CDA-7894/CDA-7893/CDA-7892, the XM Receiver
will be controllable from theCDA-7995/CDA-7894/CDA-
7893/CDA-7892.
∗ XM and its corresponding logos are trademarks of XM
Satellite Radio Inc.
NOTES
• The controls on the CDA-7995/CDA-7894/CDA-7893/
CDA-7892 for XM Receiver operation are operative
only when an XM Receiver is connected.
• The XM1 or XM2 band illuminates when in XM mode.
1 Press the SOURCE button to select RADIO Mode.
2 Press the BAND button to select XM1 or XM2.
Each press changes the band:
→ FM1 → FM2 → XM1 → XM2 → AM