Filter
Top Products
12-EN
Displaying the Title/Text
It is possible to display the CD/Station title if the title has
been previously inputted. For details, see
“
Titling Disc/
Stations
”
(page 13). Text information, such as the disc
name and the track name, will be displayed if playing a
CD text compatible disc. It is also possible to display the
folder name, the file name, and the ID3 tag, etc. while
playing MP3 files.
1 Press the TITLE button.
The mode will change every time the button is
pressed.
About “Title” and “Text”
Title: With this device, it is possible to input the CD/
Station name (refer to page 13). This inputted name
is referred to as a “title.”
You cannot input or display titles on MP3 discs.
Text: Text compatible CDs contain text information such
as the disc name and track name. Such text
information is referred to as “text.”
Radio mode:
CD mode: (Text is displayed for the CDA-7893/CDA-
7892 models when a compatible changer with CD text
is connected.)
↓
FREQUENCY DISPLAY
↓
CLOCK DISPLAY
↓
TITLE DISPLAY
↓
ELAPSED TIME DISPLAY
↓
CLOCK DISPLAY
↓
TEXT DISPLAY (DISC NAME)
∗1
↓
TEXT DISPLAY (TRACK NAME)
∗1
↓
TITLE DISPLAY
MP3 mode: (MP3 files can be played back with the
CDA-7893/CDA-7892 models if an MP3 compatible
changer is connected.)
∗1
Displayed during playback of a disc with CD Text.
“ NO TEXT” will be displayed when the CD contains
no Text data.
Text cannot be displayed for the CDA-7893/CDA-
7892 models.
∗2
If an MP3 file contains ID3 tag information, all the
ID3 tag information is displayed (e.g., track name,
artist name, and album name). All other tag data is
ignored.
“NO TAG” will be displayed when an MP3 file
contains no ID3 tag information.
∗3
The recording sampling rate and bit rate of the MP3
file are displayed.
NOTES
• Some characters may not be displayed correctly with this
device, depending on the character type.
• The CD changer must also be CD Text compatible for the Text
information to be displayed.
• When the Scroll Setting (refer to page 15) is set to “SCROLL
MANUAL”, press and hold the TITLE button for at least 3
seconds to scroll the Text information only once (TEXT
DISPLAY, FOLDER NAME DISPLAY, FILE NAME DISPLAY
or ID3 TAG DISPLAY mode).
• “NO SUPPORT” (CDA-7892: "NO SUPRT") is displayed
when the desired text information cannot be displayed on this
unit.
• If the title was not previously input, “NO TITLE” is
displayed.
Basic Operation
Rotary encoderBAND-/J
g DN TITLEf UP
↓
ELAPSED TIME DISPLAY
↓
CLOCK DISPLAY
↓
FOLDER NAME DISPLAY
↓
FILE NAME DISPLAY
↓
ID3 TAG DISPLAY
∗2
↓
FRAME DISPLAY
∗3