Filter
Top Products
22-EN
01GB05CDA9883.fm
ALPINE CDA-9883 68-08564Z10-A (EN)
4
Press FUNC./SETUP to cancel the function mode.
• When you want to store but the memory area is fulled,“MEMORY
FULL” is displayed. If you want to replace the Song title or Artist
name after you have performed the procedure in step 3, turn the
Rotary encoder to select “REPLACE YES,” and then press
//ENT.
• Press and hold /ESC for at least 2 seconds to cancel the Memory
mode. Or, the Memory mode/function mode will be canceled if no
operation is performed for 10 seconds.
Recalling the stored information (SIRIUS only)
Whenever the stored sports team, song(s) or artist(s) are playing, an
interruption ALERT appears in the display of the unit.
1
The interruption (ALERT) indicator is either on
or blinking depending on the conditions listed
below.
2
Turn the Rotary encoder to select the desired
information.
3
Press / /ENT.
• If no operation is performed for 10 seconds , the unit returns to
normal mode.
• Only a single sports team, song or artist can be displayed as an
interruption ALERT. For example, both song and artist cannot be
displayed as an ALERT at the same time.
Canceling the stored Alert Memory
(SIRIUS only)
1
During usual reception, press FUNC./SETUP to
turn the function on.
The indicator lights up.
2
Press 2.
The Memory List appears after DELETE mode has been
displayed.
3
Turn the Rotary encoder to select a list you want
to delete, and then press / /ENT.
4
Turn the Rotary encoder to select DELETE YES,
and then press / /ENT.
Select “NO” the unit will return to the Memory List display.
5
Press FUNC./SETUP to cancel the function mode.
• If /ESC is pressed and held for at least 2 seconds, or no
operation is performed for 10 seconds, the setting mode is canceled.
Search Function
You can search for programs by Category, Channel, Artist or Song.
1
Press /ESC in the XM or SIRIUS mode.
2
Turn the Rotary encoder to select Search mode,
and then press / /ENT.
CATEGORY
CHANNEL
ARTIST
*
SONG
*
* SIRIUS Only
3
Turn the Rotary encoder to select the desired
Category, and then press / /ENT.
4
Turn the Rotary encoder to select the desired
Channel Name, and then press / /ENT.
• While in Category Search mode, press /RTN to return to the
selecting search mode.
• The Search mode is canceled if you press and hold /ESC for at
least 2 seconds, or no operation is performed for 10 seconds in
Category Search mode.
• If ALERT interruption occurs in the search mode, the search mode is
canceled.
3
Turn the Rotary encoder to select the desired
Channel/Artist/Song Name, and then press
//ENT.
• While in Channel Search mode, press or to select another
Category.
• While in Channel/Artist/Song Search mode, press /RTN to return
to the selecting search mode.
• The Search mode is canceled if you press and hold /ESC for at
least 2 seconds, or no operation is performed for 10 seconds in
Channel/Artist/Song Search mode.
• Channel search is possible only in the category (last mode).
• If ALERT interruption occurs in the search mode, the search mode is
canceled.
Quick Search Function
You can search for all channels in numerical order.
1
Press and hold /ESC for at least 2 seconds in XM
or SIRIUS mode to activate Quick Search mode.
2
Turn the Rotary encoder to select the desired
Channel within 10 seconds.
The selected Channel is received.
(ALERT) indicator lights: one channel found.
(ALERT) indicator blinks: more than 2 channels found.
If more than 2 channels are found
(Blinking ALERT indicator)
DELETE NO DELETE YES
Category Search mode
Channel/Artist/Song Search mode
68-08564Z10-A_F.book Page 22 Tuesday, November 21, 2006 8:53 AM