Filter
Top Products
19-EN
01GB05CDA9883.fm
ALPINE CDA-9883 68-08564Z10-A (EN)
Connecting to an External Amplifier
When an external amplifier is connected, sound quality can be
improved by stopping the power supply of the built-in amplifier.
• No sound is produced by the system when the power output is set to
OFF.
Turning Mute Mode On/Off (INT Mute)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
Setting the AUX Mode (V-Link)
You can input TV/video sound by connecting an optional Ai-NET/RCA
Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C)
to this component.
You can change the AUX name display when AUX IN is set to ON.
Press //ENT when AUX IN is set to ON, and select AUX NAME
by turning the Rotary encoder, and then press //ENT.
After that, turn the Rotary encoder to select the desired AUX name.
If the KCA-410C is connected, it is possible to select two AUX names.
• Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press SOURCE/ to select AUX mode and
then press BAND to select your desired device.
Changer Name Setting
This setting is used when the head unit is connected to the USB Adapter
for MP3 (KCA-620M). You can set the name to be displayed on the unit
depending on the device to which the USB Adapter for MP3
(KCA-620M) is connected.
Setting the External Digital Input
When an ALPINE Ai-NET compatible digital audio processor
(PXA-H701) and a DVD player (DVE-5207) not compatible with Ai-
NET are connected, set Digital AUX to ON to enjoy 5.1-channel
surround sound.
• Press SOURCE/ , and select the DIGITAL-AUX mode, and adjust
the volume, etc.
• Depending on the connected audio processor, DVD player sound
may continue to be output, even though the source is changed to
another one. If this occurs, set the DVD player’s power to OFF.
HD Radio Station Call Setting (STATION CALL)
In the HD Radio mode, the number of display characters for the HD
Radio station name can be selected.
Digital Seek ON/OFF Setting
External Device
POWER IC ON (Initial setting) / POWER IC OFF
POWER IC OFF: Use this mode when the line output of this unit
is used to drive an external amplifier. In this
setting, the head unit’s internal amplifier is
turned OFF and can not drive speakers.
POWER IC ON : The speakers are driven by the built-in
amplifier.
General Setting
MUTE ON / MUTE OFF (Initial setting)
Amplifier
Front
left
Front
right
Amplifier
Rear
left
Rear
right
Speakers
SPEAKER
RIGHT FRONT
Front
right
SPEAKER
RIGHT REAR
Rear
right
SPEAKER
LEFT REAR
Rear
left
SPEAKER
LEFT FRONT
Front
left
AUX IN ON / AUX IN OFF (Initial setting)
CHANGER (Initial Setting) / USB / PORTABLE
D-AUX ON / D-AUX OFF (Initial setting)
HD Radio (Only when HD Radio is connected)
SHORT (Initial setting) / LONG
SHORT : 7 characters (FM)
4 characters (AM)
LONG : 56 characters
DIG SEEK ON / DIG SEEK OFF (Initial Setting)
ON :
SEEK UP/DOWN is used only for Digital Radio
Station.
OFF :
SEEK UP/DOWN is used for all Radio Stations.
68-08564Z10-A_F.book Page 19 Tuesday, November 21, 2006 8:53 AM