Filter
Top Products
7-EN
CD Text Scroll Setting
This CD player has the ability to scroll the disc
and track name recorded on CD-Text discs. The
scrolling feature will work with names greater than
12 characters. This feature will not work for the 12
character titles that were input manually.
1 Press and hold the INTLZ button for at least 2 seconds.
2 Press the f UP button repeatedly to select
"SCR"(SCROLL).
Each press of the f UP button changes the
modes as shown:
∗ CDA-7969 Only
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
3 Press the TUNE button to toggle mode between
SCROLL AUTO and MANU.
• SCROLL AUTO: the display of CD text is
scrolled continuously.
• SCROLL MANU: the display is scrolled only when
a disc is loaded or when a track is changed and
the text information exceeds 12 digits.
4 When the setting is completed, press and hold
the INTLZ button for at least 2 seconds to return
to the normal mode.
NOTES
• Initial mode is "SCROLL MANU".
• The unit scrolls only CD text names. The disc titles
input manually (refer to page 11) cannot be scrolled.
• The display of CD text will scroll even for text less
than 12 characters.
Digital Output On and Off (CDA-7969 Only)
If an optional Digital Phase Processor with the
optic digital connector is Ai-NET connected, turn
the digital output on or off as described below.
1 Press and hold the INTLZ button for at least 2 seconds.
2 Press the f UP button repeatedly to select "D-
OUT".
Each press of the f UP button scrolls the
modes as shown:
∗ CDA-7969 Only
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
3 Press the TUNE button to select the D-OUT mode.
Each press toggles between the D-OUT ON and
D-OUT OFF.
4 Press and hold the INTLZ button for at least 2
seconds to activate the normal mode.
Sound (Beep) Guide Function
This function will give audible feedback with
varying tones depending upon the button pressed.
1 Press and hold the INTLZ button for at least 2
seconds.
2 Press the f UP button repeatedly to select
"BEEP."
Each press of the f UP button changes the
modes as shown:
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
∗ CDA-7969 Only
3 Press the TUNE button to toggle the mode
between BEEP ON and BEEP OFF.
NOTE
The initial setting at the factory is BEEP ON.
4 Press and hold the INTLZ button for at least 2
seconds to set the selected mode.
Turning Mute Mode On/Off
If a device having the interrupt feature is
connected, audio will be automatically muted
whenever the interrupt signal is received from the
device. This function can be turned ON or OFF
from the head unit by following procedure below.
1 Press and hold the INTLZ button for at least 2
seconds.
2 Press the f UP button to select the MUTE
mode. Each press changes the modes as shown:
∗ CDA-7969 Only
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
3 Press the TUNE button to turn on or off the
MUTE mode.
Each press toggles between the MUTE ON and
OFF modes.
NOTE
The initial setting at the factory is "MUTE ON."
4 Press and hold the INTLZ button for at least 2
seconds again to return to normal operation.
→ AMBER → DIM → SUB-W → BEEP → MUTE
D-OUT∗ ← CLOSE ← DEMO ← AUX ← SCR ←
→ AMBER → DIM → SUB-W → BEEP → MUTE
D-OUT ∗ ← CLOSE ← DEMO ← AUX ← SCR ←
→ AMBER → DIM → SUB-W → BEEP → MUTE
D-OUT∗ ← CLOSE ← DEMO ← AUX ← SCR ←
→ AMBER → DIM → SUB-W → BEEP → MUTE
D-OUT∗ ← CLOSE ← DEMO ← AUX ← SCR ←