Filter
Top Products
12-EN
Basic Operation
Selecting DHE Mode
Using digital signal processing technology, DHE
(Digital Harmonics Enhancer) operates on
harmonic components which determine tone and
coloration of the musical instruments. The
process operates independently on individual
frequency bands, so each instrument or vocal will
be distinct. Play back clarity is enhanced to
compensate for road noises which would normally
detract from the listener's enjoyment.
1 Press the DHE button for at least 2 seconds to
switch to the DHE mode.
2 Press the Preset buttons (F1 through F6)
within 10 seconds to select the desired mode.
F1: OFF (NON EFFECT)
F2: Beat MAX (DHE1)
Strong Low Frequency emphasis.
F3: Lyric MAX (DHE2)
Strong vocal emphasis.
F4: Beat MIX (DHE3)
Good balance between bass and vocals.
F5: Lyric MIX (DHE4)
Slight vocal emphasis.
F6: Phase MIX (DHE5)
Enlivens any genre.
3 Press the F button within 10 seconds to select
the desired mode.
Digital Time Correction
Preset buttons (F1 through F6)
F1 F2F
DHE
POWER mode:
Any of the DHE effects can be modified using
the Power Mode. Enhanced bass and high
frequencies will be added to the selected DHE
effect.
FINE mode:
Selecting the DHE fine mode will emphasize the
vocal/chorus sustain for clear sound
reproduction.
PWR – FINE mode:
Both the POWER mode and the FINE mode will
be activated simultaneously.
Equalizer Presets
Six typical equalizer settings are preset at the
factory for a variety of musical source material.
1 Press the 7-Band Graphic EQ button to switch
to the EQ mode.
2 Press the Preset buttons (F1 through F6)
within 10 seconds to select the desired mode.
F1: FLAT
Flat frequency
F2: MALE (VOCAL)
Suppress higher frequencies
F3: FEMA (VOCAL)
Emphasize midrange
F4: POPS
Suppress midrange
F5: ROCK
Emphasize lows and highs
F6: NEWS
Boost midrange and suppress highs and lows
→ POWER mode → FINE mode
PWR
-
FINE mode ←
f UPDN g
7-Band
Graphic EQ