Filter
Top Products
VLD-1002-MD
Guide to installation and operation
8
Power Consumption
The power rating of the openGear frame allows 125 watts to be
redistributed over 10 slots. A single slot may exceed 12 watts but the
overall power consumption shall not be above 125 watts.
The VLD-1002-MD dissipates 14 watts.
An openGear frame, when populated with Algogear cards only
shall use no more than 8 slots.
Blank slot fillers can be used to block slots in an openGear frame. A
warning message is affixed to the VLD-1002-MD card and other Algogear
cards to ensure the user is aware of the card’s power consumption when
installing new systems, or rearranging frame configurations.
openGear frame
Algogear cards
Blocked frame slot
DO NOT REMOVE
ALGOGEAR
ALGOGEAR
ALGOGEAR
Front Module
The VLD-1002-MD card is identified with a product label located near
the card’s front edge. When installed in a frame and powered, the card
displays the product name on a dot matrix display. See drawing below.
Input 1 status (DS2)
Card status (DS1)
Input 2 status (DS3)
Not used on VLD-1002-MD (DS4)
Not used on VLD-1002-MD (DS5)
Card reference status (DS6)
Dot matrix display
Product label
ALGOGEAR
VLD1
002M
VLD-1002-MD