Page 9 of 21 www.alfaradio.ca AlfaSpid Rotator
Alfa Radio Ltd. 11211 - 154 St. Edmonton, Alberta, Canada T5M 1X8
Technical Note:
You will need to leave sufficient coax length to accommodate the
additional 180 degrees of over-travel on each end of normal rotation.
Failure to do so can cause damage to your coax and/or antennas.
The AlfaSpid controller has multiple modes of operation. You will
need to become familiar with these modes to be able to make full use
of your rotator.
Function Mode
The
button steps through the function menus. The leftmost
character on the display indicates the function mode you are
currently in.
- Normal Operations Mode
- Half Auto Mode
- Auto Mode
- Preset Mode
Controller Operation
The 0 in the
displays to the left will be
replaced by your actual
beam heading