Filter
Top Products
SPECIFICATIONS
ltltEskiTEh.i
Main unit XR-M35
FM tuner section
Tuning range
Usable sensitivity (IHF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Power output
Total harmonic distortion
Inputs
outputs
Cassette deck section
Track format
Frequency response
Signal-to-noise ratio
Recording system
Heads
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz
step)
531 kHz to 1602 kHz (9 kHz step)
350 l.rV/m
Loop antenna
25 watts per channel, Min.
RMS at 6 ohms, from 60 Hz to 15
kHz, with no more than 17. Total
Harmonic Distortion
0.08 % (15 W, 1 kHz, 6 ohms, DIN
AUDIO)
VIDEO/AUX: 400 mV
MD: 400 mV
SUPER WOOFER: 1.4 V
SPEAKERS: accept speakers of
6 ohms or more
LINE OUT 1.4 V
PHONES (stereo mini jack):
accepts headphones of 16 ohms
or more
4 tracks, 2 channels stereo
CrO, tape: 50 Hz -16000 Hz
Normal tape: 50 Hz – 15000 Hz
62 dB (Dolby B NR ON, Cr02tape
peak level)
AC bias
Deck: Recording/playback/
erase head x 1
Compact disc player section
Laser
D-A converter
Signal-to-noise ratio
Harmonic distortion
Wow and flutter
Speaker system SX-M35
Cabinet type
Speakers
Impedance
Output sound pressure level
Dimensions (W x H x D)
Weight
General
Power requirements
Power consumption
Dimensions of main unit
(W XHXD)
Weight of main unit
Semiconductor laser (k= 780 nm)
1 bit dual
94 dB (1 kHz, OdB)
0.05 % (1 kHz, OdB)
Unmeasurable
2 way, bass reflex (magnetic
shielded type)
Woofer:
130 mm (5’/a in.) cone type
Tweetec
60 mm (23/sin.) cone type
6 ohms
87 dBIW/m
155 x 260x 245 mm
(6’/8 x 10’/, x 93/, in.)
2.5 kg (5 Ibs 8
OZ.)
120 VAC, 60 tiz
50 w
175 x 260 x 277 mm
(7x 101/, x 11 in.)
4.3 kg (9 Ibs 8
OZ.)
The word “BBE” and the “BBE symbol” are trademarks of BBE
Sound, Inc.
Under license from BBE sound, Inc.
DOLBY NR
Dolby noise reduction manufactured under license from Dolby
Laboratories Licensing Corporation.
“DOLBY” and the double-D symbol no are trademarks of Dolby
Laboratories Licensing Corporation.
COPYRIGHT
Please checkthe lawsoncopyrightrelatingto recordingsfrom
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user’s
right or authority to operate this product.
Specifications and external appearance are subject to change
without notice.
I
9 ENGLISH