Filter
Top Products
OPERATION
TAPEIREV
MODE
II
EJECT
INSERTING TAPES
MULTI JOG
MODE
. You can select a reverse mode to play back one or both sides.
● Use Type I (normal), Type II (high/CrOdOrTwe Iv (metal)
tapes for playback.
Press the TAPE/REV MODE button and press the
EJECT mark to open the cassette holder.
I-EJECT
Insert a tape with the exposed side down. Push the cassette
holder to close.
To select a reverse mode
Each time the TAPE/REV MODE button is pressed, the reverse
mode changes.
To play one side only, select Z.
To play from front side to back side once only, select Z).
To play both sides repeatedly, select (Z).
PLAYING BACK A TAPE
Insert a tape
7 Press the MODE button repeatedly until “DOLBY”
appears on the display. Then, turn the MULTI JOG
dial right or left to
turn Dolby NR on or off to
match the playback tape within 10 seconds.
For tapes recorded with DOLBY NR, turn on no NR.
For tapes recorded without DOLBY NR, turn off DU NR.
2 Press the + ➤ button to start play.
Playback side of the tape
The tape counter indicates the tape
running length. (It disappears when no
tape is inserted.)
D: The front side is being played (forward).
~: The back side is being played (reverse).
To stop play, press the ■ button.
To pause play, press the II button. To resume play, press again.
To change the playback side, press the +> button in play or
pause mode.
To fast forward or rewind, press the - or> button in stop
mode. Then press the
■ button to stop the tape.
To start play when the power is off (Direct Play
Function)
Press the TAPE button. The power is turned on and play of the
inserted tape begins.
To set the tape counter to 0000
Press the ■ button in stop mode.
The counter is also set to 0000 when the cassette holder is
opened.
I 1 ENGLISH