Filter
Top Products
8
En
ADJUSTMENTS BEFORE OPERATIONS
Power
Turning the unit on
Press POWER 6STANDBY/ON (POWER on the remote
control).
Pressing TAPE, TUNER, VIDEO/AUX or CD also turns the
unit on (Direct Play Function.) When a disc or tape is
inserted, the playback will start automatically.
Turning the unit off
Press POWER 6STANDBY/ON again.
The unit goes into standby.
DEMO
If the clock has not been set, a DEMO appears on the display
when the unit is turned off.
To deactivate and activate the DEMO
Press c
when the unit is turned off.
Spectrum analyzer display
You can change the spectrum analyzer display.
Press DISPLAY on the remote control repeatedly
to select one of the three spectrum analyzer displays
(NORMAL1, NORMAL2 and BASS).
On the unit, press MODE repeatedly to display "DISPLAY",
and press ENTER within 4 seconds. Then turn MULTI JOG
within 6 seconds.
Volume
Turn VOLUME (Press VOLUME +, - on the remote
control).
Adjust from 0 (minimum) to 40 and MAX (maximum).
Tip:
Volume level setting is retained during power-off standby. If
the unit is turned off with the volume set to 19 or more, it is
automatically turned down to 18 the next time the unit is
turned on.