Filter
Top Products
16
En
8
Turn over the tape and press wREC/REC MUTE
to start recording on side B.
•AI Edit Recording cannot be used with discs with more
than 30 tracks. "TR OVER" is displayed.
•Recording cannot start from a point halfway in the tape.
Programed Edit Recording
As you program the CD tracks to record, Programed Edit
Recording displays the remaining recording time for each side
of the tape, so you can easily select a set of desired tracks
within the length of your tape.
1
Insert the recording tape in DECK 2.
2
Select the CD function and load disc(s).
3
Press SHIFT+CD EDIT/CHECK twice on the
remote control.
"PRGM" and "EDIT" are displayed and "P C-00"
appears on the display.
4
Press the numbered buttons on the remote
control to enter the length of the recording tape.
10 to 99 minutes can be specified.
•f, g or MULTI JOG can also be used to specify
tape length.
5
Press DISC DIRECT PLAY 1-3 to select a disc.
Then, press the numbered buttons on the remote
control to select the first track to be recorded
on side A.
-To select the 20th track, press +10, +10 and 0.
-To select the 15th track, press +10 and 5.
6
Repeat step 5 to select the rest of the tracks for
side A.
The remaining recording time of side A is displayed.
You cannot select a track with a longer playing time.
Side A
Tab for side A
7
Press SHIFT+CD EDIT/CHECK on the remote
control to switch to side B and select the tracks
for the side.
8
Press SHIFT+CD EDIT/CHECK on the remote
control to switch back to side A.
9
Press wREC/REC MUTE to start recording on
side A.
The tape is rewound to the beginning of side A and
recording starts.
Go to the next step when recording on side A finishes.
10
Press SHIFT+CD EDIT/CHECK on the remote
control to switch to side B.
11
Turn over the tape, and press wREC/REC MUTE
to start recording on side B.
•You cannot program more than 30 tracks. "FULL" is
displayed.
•You cannot program a track with a track number larger
than 30.
•Recording cannot start from a point halfway in the tape.
To stop recording
Press s. Recording and CD playback stop simultaneously.
To check the program
1 Before recording, press SHIFT+CD EDIT/CHECK on the
remote control to select side A or B.
2Press f or g repeatedly. The track number and
program number are displayed in succession.
To change the program of each side
Press SHIFT+ CD EDIT/CHECK on the remote control to
select side A or B, and press s to clear the program for the
selected side. Then, select tracks again.
To clear the edit program
Press s twice so that "EDIT" disappears from the display.
To prevent accidental erasure
Break off the plastic tab of the cassette tape with a screwdriver
or other pointed tool. To record on the tape again, cover the
detection slot with adhesive tape.