Filter
Top Products
4
En
Connection
Plug in the AC power cord to the AC power outlet after all
other connections are made.
1
Connect the front speakers.
Connect the right front speaker to the SPEAKERS R
terminals and place it on the right side of the unit.
Connect the left to the SPEAKERS L terminals and place
it on the left side.The speaker cords with the white stripes
go to the 0 terminals.
PREPARATIONS
Remote control
Detach the battery compartment lid at the rear of the remote
control and insert two R6 (size AA) batteries with correct
polarity.
•Replace the batteries with new ones when the operational
distance between the remote control and main unit
becomes shorter.
•Remove the batteries if the unit is not going to be used for
an extended period of time.
•The remote control may not operate if it is used under
intense sunlight, etc., or if its line of sight is obstructed.
AM antenna
FM antenna
2
Connect the supplied antennas.
Strip off the insulation of the FM antenna with twisting
the cord.
Connect the FM antenna to the FM 75 Ω terminal with
the
mark and the AM antenna to the AM LOOP
terminals.
3
Connect the AC power cord to an AC outlet.
When the AC power cord is connected to an AC outlet
for the first time, DEMO appears on the display.
To deactivate the DEMO, press c.
•Do not short-circuit the 0 and 9 speaker cord leads.
•Do not leave objects generating magnetism or objects
affected by magnetism near the speakers.