Filter
Top Products
A
DC= IN12V “--”
Q-G+
I
CONNECTING OPTIONAL
EQUIPMENT +
❑
Refer to the operating instructions of the connected equipment
for details.
. The connecting cords are not supplied, Obtain the necessary
connecting cords.
● Consult your local Aiwa dealer for recommended equipment.
VIDEO/AUX JACKS
Sound signals can be input to this unit through the jacks.
Use a cable with RCA phono plugs to connect audio equipment
(turntables, LD players with analog output jacks, VCRs, etc.).
Connect the red plug to the R jack, and the white plug to the L
jack.
When connecting a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
SUPER WOOFER JACK
Connect an optional powered sub woofer with a built-in-amplifier
to the jack.
DC JACK (12 V)
Connect the Aiwa DCW-50 car battery cord to the jack. Then
connect the other end to the cigarette lighter socket of the car.
● When the unit is used with the car battery cord, the clock does
not operate.
c After switching from DC voltage to AC voltage, the current time
must be set again.
● Use the Aiwa DCW-50 car battery cord only.
● When operating on car battery (DC 12 V), the POWER button
on the remote control does not operate. Press the POWER
button on the unit to turn the unit on. After the power is turned
on, the remote control is operational.
LISTENING TO EXTERNAL
SOURCES + EI
To play equipment connected to the VI DEO/AUX jacks, proceed
as follows.
1
Press the AUX/VIDEO button.
“AUX is displayed.
2 Play the connected equipment.
34