Filter
Top Products
4
En
Connection
Plug in the AC power cord to the AC power outlet after all other
connections are made.
1
Connect the front speakers.
Connect the right front speaker (marked with "R") to the
SPEAKER R terminals and place it on the right side of the
unit. Connect the left (marked with "L") to the SPEAKER L
terminals and place it on the left side. The speaker cords
with the black stripes go to the 9 terminals.
PREPARATIONS
2
Connect the supplied antennas.
Connect the FM antenna to the
FM 75 Ω terminal and
the AM antenna to the AM LOOP terminals.
3
Connect the AC power cord to a wall outlet.
When the AC power cord is connected to a wall outlet for
the first time, DEMO appears in the display.
To deactivate the DEMO, press c (c/don the
remote).
•Do not short-circuit the 0 and 9 speaker cord leads.
•Do not leave objects generating magnetism or objects
affected by magnetism near the speakers.
R6(AA)
Remote
Detach the battery compartment lid at the rear of the remote
and insert two R6 (size AA) batteries with correct polarity.
•Replace the batteries with new ones when the operational
distance between the remote and main unit becomes shorter.
•Remove the batteries if the unit is not going to be used for
an extended period of time.
•The remote may not operate if it is used under intense
sunlight, etc., or if its line of sight is obstructed.
FM antenna
AM antenna