Filter
Top Products
11
En
Shuffle playback
Plays the tracks on one desired disc or all discs in random
order.
1
Press MODE repeatedly until "PLAY MODE?"
appears in the display in stop mode and then
press ENTER.
2
Turn MULTI JOG to select "SHUFFLE" and then
press ENTER.
"
SHUF
" lights up.
If there is no MULTI JOG or button operation within 6
seconds, the setting is canceled.
3
To play one desired disc, press DISC DIRECT
PLAY 1-3.
To play all discs, press c(c/don the
remote).
On the remote, press PLAY MODE repeatedly until "
SHUF
"
lights up and carry out step 3.
To cancel shuffle playback
Carry out step 1 and 2, and select "CONTINUE" in step 2.
On the remote, press PLAY MODE repeatedly until "
SHUF
"
and "
PGM
" disappear.
Programed playback
Plays back up to 30 selected tracks in programed order.
1
Press MODE repeatedly until "PLAY MODE?"
appears in the display in stop mode and then
press ENTER.
2
Turn MULTI JOG to select "PROGRAM" and then
press ENTER.
"
PGM
" lights up.
If there is no MULTI JOG or button operation within 6
seconds, the setting is canceled.
3
Press DISC DIRECT PLAY 1-3 to select a disc.
Go to the next step when the tray stops rotating.
On the remote, press DISC SKIP.
4
Turn MULTI JOG to select a track and then press
ENTER.
The selected track number and the program number appear
in the display.
On the remote, press r or t and then press ENTER
or press the numbered buttons:
-To select the 10th track, press 0/10.
-To select the 20th track, press +10, +10 and 0/10.
-To select the 25th track, press +10, +10 and 5.
5
Repeat step 3 and 4 to program other tracks.
6
Press c(c/don the remote).
On the remote, press PLAY MODE repeatedly until "
PGM
"
lights up and carry out step 3 to 6.
•During programed playback, you cannot select a disc or a
track with the numbered buttons.
•If the total playback time of the program exceeds 99:59
minutes, or if a track with a track number exceeding 30 is
programed, the playing time is displayed as "- -:- -".
•You cannot program more than 30 tracks. "FULL" is
displayed.
To clear a track
Press CLEAR on the remote in stop mode. A track is cleared
from the end of the program.
To clear the entire program
Press s in stop mode.
To add tracks to the program
Repeat step 1 to 4 before starting playback. The tracks are
added to the end of the program.
To cancel programed playback
Carry out step 1 and 2, and select "CONTINUE" in step 2.
On the remote, press PLAY MODE repeatedly until "
PGM
"
and "
SHUF
" disappear.
•The program contents are retained even if the program is
canceled or after programed playback finishes. The same
program plays back if you carry out step 1, 2 and 6.
•If you cancel programed playback and then select an MP3-
CD, the program for the previously selected disc will be
cleared.
Notes on CDs
•Do not place more than one disc on one tray.
•Do not tilt the unit with discs loaded.