20
ENGLISH
DEMO
(Demonstration)
You can enjoy two kinds of DEMO modes on this unit.
One is
demo
, the other one is
game demo
.
In the demo mode, colorful illumination demonstrates in the
display.
In the game demo mode, you can play a game.
To switch the two modes to each other, press POWER while
pressing c when the power is off.
To activate the demo or the game demo, press c when the
power is off.
To deactivate the demo or the game demo, press CLOCK.
See below about how to play the game demo.
To play the game demo
1
To start the game demo, press c when the power
is off
Three numbers on the display start to run.
2
Press s once.
The number on the left side stops.
3
Press s twice to stop the remaining two
numbers.
Scoring:
20 points are given to start the game.
If all the numbers are equal, 50 points are added to the score.
If not equal, one point is subtracted.
If the gained points reach 9999, you win.
If the gained points fall to 0, you lose.
To reset the game demo
Press CLOCK, then press c.
To change the probability of equalizing the three numbers
Press f or g repeatedly to select one of the three probability
levels when playing the game demo. The tray number indicator
in the display changes between 1 and 3. As the tray number
increases from 1 to 3, the higher the probability of equalizing.
• While playing the game demo, s, f, g and c are
available only for the game demo. Turn the power on to use
these buttons for the functions such as CD playing, etc.
• During the game demo, some indicators unrelated to the actual
operation light up on the display.
OTHER FEATURES
4-Channel Multi-Amplifier System
To provide reinforcement for the ultra-low frequencies, in addition
to the Left/Right 2-channel amplifier used to reproduce mid-to-
high-range frequencies, this system incorporates a second L/R
2-channel amplifier just for reproduction of ultra-low frequencies
— making it, in effect, a 4-amplifier system. By utilizing discrete
amplifiers for mid to-high-frequencies and low frequencies, high-
quality sonic reproduction that is virtually free from distortion can
be realized.
This Multi Amplifier System, which utilizes independent circuitry
for the different frequency ranges, enables superb sonic
reproduction free from distortion.
Built-in Subwoofer System
The built-in subwoofer System has a separate subwoofer cavity
area that is part of the loudspeaker cabinet structure, which acts
as a sonic filter to cut distortion components. (In the Multi Amplifier
System, the ultra-low frequency signals transmitted from their
own independent amplifier are reproduced in this area.) This
separate construction gives a clear, rich definition to bass
reproduction and it can realize clear, well-defined mid-to-high
frequency signals.
And AIWA’s built-in subwoofer system incorporates a subwoofer
capable of powerful, satisfying bass performance with true stereo
separation.