Aiwa CX-NA30 CD Player User Manual


 
PROGRAMMED EDIT RECORDING
3,7,8,9
5
4,5
3,7,8,9
u
Programmed edit function enables CD recording while checking
the remaining time on each side of the tape as the tracks are
programmed.
EEn3
The programmed edit recording will not start from a point halfway
in the tape. The tape must be recorded from the beginning of
either side.
1
2
3
4
5
Insert the tape into deck 2.
Insert the tape with the side to be recorded on first facing out
from the unit.
Press the CD button and load the disc(s).
Press the EDIT/CHECK button twice while
pressing
the SHIFT button on the remote control.
“EDIT and “PRGM” lights up on the display.
Press the numbered buttons on the remote
control to designate the tape length.
10 to 99 minutes can be specified.
Maximum recording
Tape length
time for side A
Tape side A (front side)
Press the one of the DISC DIRECT PLAY buttons
to select a disc.
Then, press the numbered buttons and the + 10
button on the remote control to program a track.
Example: To select the 10th track of disc 2, press the DISC
DIRECT PLAY 2 button, then press the + 10 and O buttons.
6
7
8
9
10
Repeat step 5 for the rest of the tracks for side A,,
A track whose playing time is longer than the remaining time
cannot be programmed.
Remaining time
of side A
Total number
Programmed
of programmed
tracks
tracks
Press the EDIT/CHECK button while pressing the
SHIFT button on the remote control to select side
B and program the tracks for side B.
After confirming B on the display, repeat step 5.
Press the EDIT/CHECK button while pressing the
SHIFT button to select side A and press the @
REC/REC MUTE button to start recording.
CD play and recording of edited tracks for the first side start
simultaneously. When the last truck programmed for side A,
deck 2 enters the recording stop mode. After entering the
recording stop mode, go to step 9.
Press the EDIT/CHECK while pressing the SHIFT
button on the remote control for recording olf
the second side.
B is displayed.
Turn over
the tape in deck 2 and press the @
REC/REC MUTE button to start recording.
Recording starts.
To stop recording
Press the
button. Recording and CD play stop simultaneously.
To check the order of the programmed track numbers
Before recording, press the EDIT/CHECK button while pressing
the SHIFT button on the remote control to select side A or B, and
press the + or - button repeatedly.
Program number
Track number
Programmed
track numbers
To change the program of each side
Press the EDIT/CHECK button while pressing the SHIFT button
on the remote control to select side A or B, and press the W
CLEAR button to clear the program of the selected side. Then
program tracks again.
To clear the edit program
Press the
button twice so that “EDIT disappears on the
display.
4
Recording is inhibited ifthe erasure prevention tab on either side
of the tape is broken off.
ENGLISH 1 ‘t