Filter
Top Products
DUBBING A TAPE MANUALLY
m
● Set the tape to the point where recording will start.
● Note that recording will be done on one side of the tape only.
1
2
3
4
Press the TAPE button.
Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert the tapes with the sides to be played back or recorded
on facing out from the unit.
Press
the TAPE/DECK 1/2 button to select
deck 1.
“TP 1“ is displayed.
Press the ● REC/REC MUTE button to start
recording.
Playing and recording start simultaneously.
To stop dubbing
Press the
■ button.
DUBBING THE WHOLE TAPE
This function allows you to make exact copies of the original
tape.
w
● Dubbing does not start from a point halfway in the tape.
● Note that recording will be done on one side of the tape only.
1
2
3
Press the TAPE button.
Insert the original tape into deck 1 and the tape
to be recorded on into deck 2.
Insert each tape with the side to be played back or recorded
The tapes are rewound to the beginning of the front sides,
and recording starts.
To stop dubbing
Press the
■ button,
m
Recording does not start, if the erasure prevention tab on either
side of the tape is broken off,
ENGLISH 1 ~!