Filter
Top Products
Main unit CX-NA222
FM tuner section
Tuning range
Usable sensivity (IHF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Power output
Total harmonic distortion
Inputs
outputs
Cassette deck section
Track format
Frequency response
Recording system
Heads
87.5 MHz tO108 MHz
13.2 dBf
75
ohms (unbalanced)
530
kHz to 1710 kHz (1OkHz step)
531
kHz to 1602 kHz (9 kHz step)
350 pV/m
Loop antenna
30W +30W (50
HZ – 20 kHz,THD
less than 1
Y., 6 ohms)
40
W +40 W (1 kHz,THD lessthan
10 %, 6 ohms)
0.05
9!. (15W, 1kHz, 6 ohms, DIN
AUDIO)
VIDEO/AUX: 500 mV
SPEAKERS: accept speakers of 6
ohms or more
SURROUND SPEAKERS:
accept speakers of 8 ohms to 16
ohms
PHONES (stereo jack): accepts
headphones of 32
ohms or more
4 tracks, 2 channels stereo
50
Hz -10000 HZ
AC bias
Deck 1:Playback head x 1
Deck 2:Recording/playback head
x 1,erase head x 1
Compact disc player section
Laser
Semiconductorlaser(k= 780 nm)
D-A converter 1 bit
dual
Signal-to-noise ratio 85
dB (1 kHz, OdB)
Harmonic distortion
0.05 % (1 kHz, OdB)
Wow and flutter
Unmeasurable
General
Power requirements 120 V AC, 60 HZ
Power consumption
90 w
Dimensions of main unit
260 x 330x 350
mm
(Wx Hxf2)
(10’/4 x 13X ls7/8 In.)
Weight of main unit
5.9
kg(13 Ibs)
Speaker svstem SX-NA332 (For NSX-A222)
Cabinet type 2 way, bass reflex (magnetic
shielded type)
Speakers
Woofer:
120 mm (4
3/4 in.) cone type
Tweeter:
20 mm
(13/16in.) ceramic type
Impedance
6 ohms
Output sound pressure level 87
dBiW/m
Dimensions (W x H x D) 234 x 324 x 270 mm
(9
‘/4x 12 7/6x 10 3/4in.)
Weight 2.8 kg (6 lbs 3
OZ.)
SDeaker system SX-NA335 (For NSX-A223)
Cabinettype
2 way, bass reflex (magnetic
shielded type)
Speakers Woofer:
120 mm
(4 3/4in.) cone type
Tweeter:
10 mm
(13/32 h) Ceramk type
Impedance
6 ohms
Output sound pressure level 87
dBIWfm
Dimensions (W x H x D) 235 x 324x 250 mm
(9
3/8X 12 7/8X 9 7/8M.)
Weight 2.8 kg (6 Ibs 3 OZ.)
Specifications and external appearance are subject to change without
notice.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the Interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this
product, which are not
expressly approved by the manufacturer, may void the user’s
right or authority to operate this product.
20 ENGLISH