Filter
Top Products
TAPEPLAYBACK
Tape direction indicators
B
Before turning the ignition switch off
Ensure to eject a cassette from the unit before
turning the ignition switch off. Otherwise, the unit
may bedamaged when you detach the control panel.
Switching the modes
If the unit is in the radio when you insert a
cassette, the unit will enter the tape mode
automat ically.
To prevent tape problems
Before inserting acassette into the unit, make
sure that there is noslack inthe tape. If necessaty,
take uptheslack byinserting a pencil into the
spindle hole and wind the slack up.