Filter
Top Products
0-9, +10
MODE
EQ
f, g
VOL k, i
s STOP
BAND
DISPLAY
e PLAY/
PAUSE
PRESETTING STATIONS
You can preset up to 15 stations in each band.
1
Select a station.
2
Press s STOP/SET/CLEAR* once so that
“M” is displayed to store the station.
A station is assigned a preset number, beginning
from 1 in consecutive order for each band.
* or s STOP on the remote control (CSD-FD89/79
only)
3
Repeat steps 1 and 2.
The next station will not be stored if a total of 15
preset stations have already been stored for a
band.
To listen to preset stations
Select a band then press PRESET or e PLAY/
PAUSE repeatedly.
To select a preset number directly with the
remote control (CSD-FD89/79 only)
Press the numbered buttons 0-9 and +10.
Example:
To select number 15, press +10 and 5.
To select number 10, press +10 and 0.
To clear a preset station
Select the preset number first. Within 4 seconds, hold
down s until “M” and the preset number disappear.
The higher numbers in the band are decreased by one.
SOUND ADJUSTMENT
Volume or tone adjustment does not affect
recording.
VOLUME (VOL, CSD-FD89/79 only)
Turn VOLUME on the unit or press VOL i or k on
the remote control. The volume level is displayed
as a number from 0 to 25.
• The volume level is automatically set to 14 if the
power is turned off when the volume level is set
to 15 or more.
• Pressing DISPLAY on the remote control
displays the adjusted volume level (CSD-FD89/
79 only).
3-MODE EQ* (equalizer)
Press 3-MODE EQ repeatedly until the desired
mode is displayed.
The equalizer mode changes to R (Rock), P (Pop),
J (Jazz) or no equalization, cyclically.
Rock - Emphasizes the high and low range of
music.
Pop - Emphasizes voice and midrange of music.
Jazz - Emphasizes the low range of music.
* or EQ on the remote control (CSD-FD89/79 only)
T-BASS system
The T-BASS system enhances the realism of low-
frequency sound.
Press T-BASS to turn it on or off.
ENGLISH 7
En
Preset number
Frequency
(CSD-FD89/79 only)