Filter
Top Products
To position the antennas
FM feeder antenna:
Extend the antenna horizontally in a T-shape and fix its ends to
the wall.
AM
antenna:
Position to find the best reception.
To stand the AM antenna on a surface
Fix the claw to the slot.
.
,
● Be sure to connect the speaker cords correctly. Improper
connections can cause short circuits in SPEAKERS terminals.
● Do not leave objects generating magnetism, such as credit
cards, near the speakers, as the objects may be damaged.
● Do not position the FM antenna near metal objects or curtain
rails,
● Do not position the AM antenna near other optional equipment,
the stereo system itself, the AC cord or speaker cords, as
interference will occur.
● Do not unwind the AM antenna wire.
, -i .. . ..
...... ,*,= :,.7,.,.!!. --- A, ,,,,
COnneCting AN OuTDOOR AN’TIiiiiii
,-
For better FM reception, use of an outdoor antenna is
recommended.
Connect the outdoor antenna to FM 75 Q terminals.
Inserting batteries
Detach the battery cover on the rear of the remote control and
insert two R6 (size AA) batteries,
R6(AA)
When to replace the batteries
The maximum operational distance between the remote control
and the sensor on the main unit should be approximately 5 meters
(16 feet), When this distance decreases, replace the batteries
with new ones.
To use SHIFT on the remote control
Buttons @) have two different functions. One of these functions
is indicated on the button, and the other on the plate above the
button,
To use the function on the button, simply press the button.
To use the function on the plate above the button, press the
button while pressing SHIFT.
To use FUNCTION on the remote control
FUNCTION
substitutes for the function buttons (TAPE, TUNER/
BAND, VIDEO/AUX/PHONO, CD) on the main unit.
Each time FUNCTION is pressed, the next function is selected
cyclically.
0
SH
FU
● If the remote control is not going to be used for an extended
period of time, remove the batteries to prevent possible
electrolyte leakage.
● The remote control may not operate correctly when:
- The line of sight between the remote control and the remote
sensor inside the display window is exposed to intense light,
such as direct sunlight
- Other remote controls are used nearby (those of a television,
etc.)
I To connect other optional equipment+ page 16. I
ENGLISH 4