Filter
Top Products
2 Connect the stereo turntable to the main unit.
Connect the red plug to VIDEO/AUX/PHONO IN Rjack, and
the white plug to VIDEO/AUX/PHONO IN L jack.
Check the AC voltage
The rated voltage of your unit shown on the rear panel is 120 V
AC. Check that the rated voltage matches your local voltage.
e
Q
0 ‘o’
IMPORTANT
,0
Connect the speakers, antennas, and all optional equipment first.
9
0
.
Then connect the AC cord in the end,
Speakers
3 Connect the supplied antennas.
There are no difference between the s~eakers. Both s~eakers
Connect the FM antenna to FM 75 Q terminals and the AM
can be connected as L (left) or R (rightj.
antenna to
AM LOOP terminals,
1
AM antenna
Connect the right and left speakers to the main
h
FM antenna
unit.
W
Connect the right speaker cord to SPEAKERS R terminals,
and the left to SPEAKERS L terminals.
The speaker cord with the white stripe should be connected
to the 0 terminal and the black cord to the O terminal.
;:;1
~ ~ ~
4
Connect the AC cord to an AC outlet.
>1 ; 4
3Q
AM antenna
FM antenna
2
Stereo turntable
~1
1 Right spear
Speake<
&-A@
pj_
-n%
1
Left speaker
A
\
+To an AC outlet
AC cord
14
cord
+To an AC outlet
3 ENGLISH