Filter
Top Products
10
En
ADJUSTMENTS BEFORE OPERATIONS
Power
Turning the unit on
Press POWER 6STANDBY/ON (POWER on the remote
control).
Or press FM, AM, VIDEO/AUX/DVD or CD, the playback will
start automatically if a disc or tape is inserted.
Turning the unit off
Press POWER 6STANDBY/ON again.
The unit goes into standby.
Volume
Turn VOLUME (Press VOL N,M on the remote
control).
Adjust from 0 (minimum) to 49 and MAX (maximum).
Tip:
Volume level setting is retained during power-off standby. If
the unit is turned off with the volume set to 21 or more, it is
automatically turned down to 20 the next time the unit is turned
on.
DEMO
If the clock has not been set, a DEMO appears on the display
when the unit is turned off.
To deactivate and activate the DEMO
Press DEMO/ECO.
Motorized Slide Window
Reveals and covers the operation buttons.
To move the Window up/down
Press Window UP or WINDOW DOWN.
To select AUTO or MANUAL mode
1 Press FUNCTION MODE repeatedly until "WINDOW" is
displayed.
2 Turn MULTI JOG to select "AUTO" or "MANUAL" and
then press ENTER.
If there is no MULTI JOG operation within 4 seconds, the
setting is canceled.
AUTO mode
- The Window moves up and down automatically.
e.g.) It moves up when CD function is selected (CD is
pressed).
MANUAL mode
- The Window moves up and down as you operate with
WINDOW UP or WINDOW DOWN.
To display the current mode
Press FUNCTION MODE repeatedly until "WINDOW" is
displayed and then press ENTER within 4 seconds. The mode
will be displayed for 4 seconds.
Note on WINDOW
Do not place anything on the top of the Window (on the top of
the unit).
To change the left/right balance
Press MANUAL SELECT repeatedly on the remote control until
"L/R" is displayed. Then, press f or g within 4
seconds.
•The front speaker level for the Dolby Digital and Dolby Pro
Logic systems is changed as well.