Filter
Top Products
En
ENGLISH
5
PREPARATIONS
*
1
When connecting a monaural video recorder, use a stereo-mono
connecting cord (not supplied).
*
2
When connecting an LD player equipped with the AC-3 RF OUT
terminal, use an RF demodulator unit. Also connect the analogue
AUDIO OUT terminals of the LD player to the receiver to play all
the sources. For further information, refer to the instructions of
the LD player.
*
3
Input sound through the 5.1CH INPUT or DIGITAL IN terminals
(COAXIAL (VIDEO 2), OPTICAL (VIDEO 1) and OPTICAL (DVD))
cannot be recorded. When recording the sound from the DVD,
CD, MD or LD player, connect the analogue AUDIO OUT terminals
of the player to the corresponding AUDIO IN terminals of the
receiver.
*
4
With this connection, the picture noise may appear when playing
copy protected DVDs. In this case, it is recommended to connect
the VIDEO OUT terminal of the DVD player directly to a TV set,
not through the receiver.
VIDEO
DVD
VIDEO 1 / MD
VIDEO 1 / MD
TAPE AUX CD
MONITOR
VIDEO 2
/
LD / TV
VIDEO 2
/
LD / TV
IN
IN
IN
IN
IN
IN
OUT
VIDEO OUT
OUT IN IN INOUT
DVD
AUDIO
L
R
AUDIO
L
R
FRONT
5.1CH INPUT
ININ
IN IN
SUB
WOOFER
SURROUND
CENTER
Audio equipment connections
to LINE IN
to LINE OUT
Tape deck
CD player
to LINE OUT
DVD PLAYERS CONNECTIONS
To connect a DVD player without a decoder, connect the player
to the DIGITAL IN terminals of the unit.
To connect a DVD player with a decoder and 5.1 ch output
terminals, connect the player to the 5.1CH INPUT terminals of
the unit.
• The 5.1CH INPUT terminals can also be used when connecting
a digital TV with multi-audio output terminals.
u
Signal stream